Electronics Forum | Mon Nov 15 21:35:50 EST 1999 | Dave F
Bob Bob: Fortunately, you found this before you built-up a lot of product. Some thoughs and other drivel: 1 Use IPC-TM-650, Method 2.4.8 for copper peel with a Instron machine. Typical pad peel strength requirement for FR-4, 2 oz. copper is: 6 l
Electronics Forum | Fri Sep 09 05:07:12 EDT 2005 | Rob
Strange that - whenever we take on a new customer & agree to work together in a spirit of partnership they invariably try returning all of their old failures, often with our labels hastily re-stuck over them. We often change the copper ever so sli
Electronics Forum | Wed Nov 26 09:16:59 EST 2008 | barryg
Hello everyone, after a short layoff I am glad to be back. I have a question. I have a button (snap button) that is being soldered to a strip of sac coated copper. We are questioning the joint strength of this from our vendor as we see these popping
Electronics Forum | Thu Jul 09 21:04:50 EDT 1998 | Dave F
| Hi there, | I am looking for some informations concerning the shear or pull strength of a typical TQFP 20 mils leads in relationship with the Copper/Tin intermetalic layer thickness. Could anyone help? | | Thank in advandce. | rgs, | chiakl Chiakl
Electronics Forum | Tue Mar 14 16:26:45 EST 2006 | patrickbruneel
BeCu is not solderable without plating Cu, Sn, Ag, Ni etc. The solder joint will only be as strong as the bond strength of the solderable plating to the BeCu Pat
Electronics Forum | Thu May 18 03:15:32 EDT 2017 | wama
We are soldering wire 26AWG to jack socket. However after went through washing, baking, coating, curing processes the wire breaks (at joining point with jack socket) during wire dressing. We have tried to increase and decrease the solder amount but r
Electronics Forum | Mon Jul 06 20:32:34 EDT 1998 | Chiakl
Hi there, I am looking for some informations concerning the shear or pull strength of a typical TQFP 20 mils leads in relationship with the Copper/Tin intermetalic layer thickness. Could anyone help? Thank in advandce. rgs, chiakl
Electronics Forum | Tue Nov 08 05:00:23 EST 2005 | rlackey
Hi CW, Regarding orientation, yes, your diagram is right - see the following link for confirmation. http://search.murata.co.jp/Ceramy/image/img/A18X/C2EB3C.PDF Regarding information on bending strength you want to talk to your local Murata office
Electronics Forum | Tue Aug 21 20:52:06 EDT 2007 | davef
There is not standard for the force to pull an axial lead from a soldered connection. ".....IPC does not have pull tests in any of its standards, and some reliability experts would prefer to keep it that way, pull tests are commonly used by some lea
Electronics Forum | Fri Nov 22 08:57:56 EST 2002 | davef
Q1: What do you mean by "if the board is manufactured properly"? A2: If the epoxy is noy cured prooperly, for instance, the copper will not be well attached to the glass. So, peel strength will be lower. Q2: I don't believe that the peel off/or lif