Electronics Forum | Fri Nov 25 16:06:59 EST 2011 | nick79
Hi Everyone, I'm new here,does anyone have the samsung smt cp45fv neo user manual ? I'm new,and working with it now,please help. Thanks in advance.
Electronics Forum | Wed Oct 12 02:44:38 EDT 2016 | bukas
hello, I have a problem with CP45FV Neo swing mirror. The mirror it self works fine, manually controlled it moves to correct position and back. While working it also moves properly but when machine is about to check for nozzle existence at the end of
Electronics Forum | Tue Mar 07 09:35:55 EST 2017 | buckcho
hello, I have a problem with CP45FV Neo swing > mirror. The mirror it self works fine, manually > controlled it moves to correct position and back. > While working it also moves properly but when > machine is about to check for nozzle existence a
Electronics Forum | Thu Nov 08 11:50:36 EST 2018 | aval
Thanks a lot! Is the service manual available on internet? I tried to google but nothing.
Electronics Forum | Sun Jun 21 02:43:27 EDT 2020 | jmelson
I'm planning to upgrade my P&P. We had a local auction that included a Samsung CP45FV. I was able to download a NEO manual, it was very well written and the Samsung software looks just incredible for setup and programming the vision system. But, t
Electronics Forum | Wed Aug 03 10:09:27 EDT 2011 | geb
Our Samsung CP45FV Neo is out of warranty, but due for its annual calibration/ service, however we are wondering whether it is really needed. The line only runs for 8 hours a day 5 days per week (including setup), so not heavy usage. The manual does
Electronics Forum | Sat Nov 10 18:56:23 EST 2018 | cpcompany
Hi, Aval Let me introduce myself. I am Casey Park from Starworks Korea and providing used SMD equipment especially Samsung pick and placer and Mirtec AOI. Plus I provide refurbishment on old Samsung pick and placer. I have CP45FVNeo manual in PDF
Electronics Forum | Wed Aug 03 11:38:17 EDT 2011 | kahrpr
If your parts are placing correctly you should be fine as far as calibration. As with all pick & place machines they need greased and filters changed. The maintenance should be in the manual. You can call dynatech they should be able to help you out.
Electronics Forum | Tue May 25 12:24:17 EDT 2021 | bukas
is Mark3 program started on startup or do you start it manually? It can be like this if you run it manually. Other cause is bad contact in PCB slot or connector in 90% cases. Wash then with contact cleaner and insert and pull out few times to clean c
Electronics Forum | Wed May 26 04:51:12 EDT 2021 | starsanat
Thank you for your attention. It shows an error on startup too, so it get closed by itself. when I start it manually it shows the above mentioned errors. So I should never open up Mark3 manually right? I'll clean everything up and tell you the result
.gif)
