Electronics Forum | Thu Aug 24 19:26:07 EDT 2006 | darby
Dave, Cygnal was taken over by Silabs. I based my design on the second link that you provided. Tell me folks, are you using one large pad with only the stencil having the grid, or are you actually breaking up the large pad into grids with mask around
Electronics Forum | Thu Aug 24 03:20:36 EDT 2006 | aj
we had problems with fillets and shifting aswell,but the recommended print aperture is reduce thermal pad by 35% and offset the lead print by 3thou...i.e. 3thou over hang on outer edge of lead which also moves the paste 3thou in from the inner edge .
Electronics Forum | Tue Aug 02 22:49:55 EDT 2005 | davef
IPC-A-610D Section 5, shows a variety of photographs of: * Good lead-free solder connections * Lead-free soldering anomalies Hot Tear / Shrink Hole is one such anomaly. This shrinkage effect appears primarily on wave-soldered joints, but can also
Electronics Forum | Tue Aug 22 21:00:39 EDT 2006 | davef
National says: [ http://www.national.com/packaging/llp/faq.html#faq_manu ] Manufacturing FAQ's Are there any precautions that need to be taken with the LLP package? It is critical to follow National�s guidelines for successful surface moun
Electronics Forum | Sun Jun 25 22:58:49 EDT 2000 | gary
thanks for the feedback....but what's your delta T and how will you know that you are within the delta T range ?...I think this is the main point of the above topic...can you elaborate more on how did your company get Delta T ? thanks and regards,
Electronics Forum | Thu May 17 11:13:56 EDT 2007 | stepheniii
The heat you are putting into it is replacing heat it loses. The greater the delta T the greater the heat loss. You lose less heat if the pot is cold. Yes you need to use more heat at the start of the day but it is less than the heat needed to keep i
Electronics Forum | Mon Jun 26 12:53:41 EDT 2000 | Michael Parker
I belive I once saw a picture of a Delta-T. It was in a very old Popular Science magazine. Some yahoo from Ohio wanted to put wings on his ol' tin lizzy. He also had some elaborate plans to convert his flat head V-8 to run off corn likker. I say chuc
Electronics Forum | Thu Sep 06 17:37:05 EDT 2007 | hakerem
Hi Joris - There is an excellent wave solder guide called "Take No Prisoners" that includes instructions for attacking and eliminating solder balls and preventing their recurrence: 1. Increase Dwell Time Solder balls are normally caused by too much f
Electronics Forum | Mon May 10 07:53:30 EDT 2004 | pjc
most machines have fixed angle of 6 deg. some are adjustable from 5 - 7 deg., but 6 is most popular.
Electronics Forum | Sun Feb 28 20:05:54 EST 2010 | aungthura
Dear all There are alot sockets in our products,BIB.These skts are lifted abit after being solderd with wave machine.If the skts become lifted, how much tolerance of the high is acceptable? as example 1mil~5mil,or,1mil~8mil. Pls advise me. Thanks in