Electronics Forum | Wed Sep 20 11:30:21 EDT 2006 | pms
Home Depot ...............
Electronics Forum | Wed Dec 06 17:06:06 EST 2006 | Mario Scalzo
For a not-so-technical solution, we have a few customers that are using a Maytag "SkyBox". Available from Home Depot. Like a small soda vending machine, but allows you to control the dispensing. Sincerely, Mario Scalzo-CSMTPE, Dartmouth 6 Sigma G
Electronics Forum | Fri Jan 29 19:11:10 EST 2010 | kaz
We (Industrial Electronics Service Depot) have been using a dishwasher with success on dirty/contaminated boards but without BGAs. Now we have a CPU board with couple of BGAs on it and no experience/expertise.. Is the washing it and the compressed
Electronics Forum | Fri Aug 12 10:10:03 EDT 2011 | rway
I would say you have absolutely no hope of repairing this board. I'm sorry, this is not a knock against you, you just lack the technical expertise to make a go of it. Save yourself some trouble and find a new board or a repair depot that can fix it
Electronics Forum | Fri Jun 02 17:43:17 EDT 2000 | Dave F
James: I believe Delmat is a proprietary product. Check with some of the solder fixture fabricators in the archives. Continuing, I would not select knowingly Delmat as a board stiffener. It's a composite material similar to oriented strand board
Electronics Forum | Fri Feb 23 10:24:24 EST 2001 | johnthor
We still build a legacy product with a primitive backplane using silver plated fork terminals for outside world connections. After some 20 years of no problems the fork terminals on raw stock PCBs were black and almost unsolderable. Because of the
Electronics Forum | Tue Sep 26 23:16:21 EDT 2006 | KEN
powder coating. Hmmmmm.....racing red, performance blue. Dude I'm on board! Also, (if possible) I wold like to see paint schemes like NASCAR. M&M, Home Depot, Lowes....can ya' feel the vibe? (Hey, let's not get crazy about the Cognex system -my s
Electronics Forum | Mon May 14 09:39:26 EDT 2018 | raylawre
How hard is it to find green plastic spatulas for solder paste application?!? Everything I find online specific to the industry is coming out of the UK or so it seems. Nothing stateside? I hate to hit up our paste vendors for freebee spatulas (althou
Electronics Forum | Tue Mar 19 15:38:48 EST 2002 | stefwitt
For a few thousend boards, I would look into some automation. In order to get the components off the boards you could run the boards through the reflow oven with the cooling fans turned off. When the boards come out of the oven the solder is still l
Electronics Forum | Thu Dec 15 23:04:07 EST 2005 | Manyhats
Hello, we are a low volume high mixed CM looking for a new addition to our SMT depot. We are currently running 2 Mydata TP-11 Hydra and feel that this can not meet our 06' forcast and current builds. I need to make a decision whether to go with the S
