Electronics Forum | Mon Jul 04 05:13:43 EDT 2016 | lukvel
I have some boards which are charged with electrostatic and which are not connected to any voltage source. I am removing all the electrostatic charge by grounding them using a very similar technology to that of ESD mats. Is there any standard which
Electronics Forum | Mon Jul 04 09:09:06 EDT 2016 | lukvel
Yes I can use my field meter. But is there a standard which specifies the minimum electrostatic discharge time for the PCBs or for the components?
Electronics Forum | Mon Jul 04 09:03:44 EDT 2016 | davef
Can you use your field meter to measure the level of charge on your boards?
Electronics Forum | Tue Jul 05 11:50:52 EDT 2016 | emeto
Depending on the Capacitors I will wait at least 15 seconds to be safe.
Electronics Forum | Wed Jan 23 23:45:35 EST 2019 | kiransahu
Piezoelectric type (office/industrial) In this method, a piezoelectric (piezo) element, whose volume is deformed when voltage is applied, is used to discharge ink particles. This element is attached to the component that is filled with ink. Then, th
Electronics Forum | Wed Jul 06 10:40:43 EDT 2016 | ttheis
What about grounding the board while you are cleaning it to immediately disspate the static?
Electronics Forum | Wed Jul 06 15:45:04 EDT 2016 | ttheis
I was thinking placing it on an esd mat during cleaning.
Electronics Forum | Fri Jul 09 13:17:40 EDT 2004 | Mike Konrad
The following link discusses the advantages and disadvantages of batch and inline cleaning equipment. The validity of each technology is determined by your unique / specific application. http://www.aqueoustech.com/Q_A_Batch_Inline.htm Batch mac
Electronics Forum | Thu Jul 07 01:26:34 EDT 2016 | lukvel
I have not tested whether there is electrostatic discharge on the PCB or not because the electrostatic meter is still on its way. But the IPC-A-610 section 3.1.2 specifies that yes even compressed air nozzles that move air over insulating surfaces g
Electronics Forum | Mon Mar 03 14:09:59 EST 2003 | Bill Schreiber
Hello Alwil, It appears that some of the other respondents are recommending that the waste stream be discharged to drain, if possible. Keep in mind, the chemistry used is not the only factor to determine legal drain disposal. If you are cleaning s