Electronics Forum | Fri Sep 13 11:50:03 EDT 2002 | dougt
What is happening is your bench supply is unable to supply enough current so the voltage drops. When you turn up the volume knob your asking for more current and the voltage drops more (the led's in the faceplate dim). It also sounds like when you
Electronics Forum | Sat Feb 03 10:51:47 EST 2007 | Sami
Hello to all. I have faced with a strange problem with Universal machine GSM Genesis, After an 8 hours of production without a Stop then, the M/C starts displaying components non aailable for many feeders in the same feeder bank! eventhough the feede
Electronics Forum | Sat Apr 01 16:41:01 EDT 2023 | dilogic
Today I stumbled upon very odd issue - we have one GSM2 with FlehJet heads on both axes. New program was created and it stops on the first task for Head2 throwing out a message like this: "Component 0u1/0805 (reference id C4) can't be found wit
Electronics Forum | Mon May 06 02:30:25 EDT 2002 | dszeto
We have continual vision process error 1CB02003 on narrow view camera during nozzle centering measurement. The wide view camera works properly. So far we have done the following things to rectify the problem but the problem still exists: 1. Replac
Electronics Forum | Mon Oct 23 15:42:46 EDT 2000 | Jeff
Bach, I was previously an SMT Supervisor with 5 years battling this issue. The following formula has worked well for me after I figured it out - whoich took a long process of trying out new approaches. 1. Production Supervisors must believe they c
Electronics Forum | Thu Aug 21 22:10:07 EDT 2003 | adlsmt
Well, for some reason the board house will pay for the boards but has some issue with paying for the parts on them. Why am I not supprised? Perhaps I have mis-diagnosed the problem. We have found two different board p/n's with the same type of defec
Electronics Forum | Tue May 26 14:50:07 EDT 1998 | Dave F
| | I'm reviewing my board fab spec. It calls for a minimum SnPb thickness of 50 microinches on HASL PWB's. I've looked at other specs that call out anything from 30 to 80 microinches, and others that just say the copper pad must be covered and sol
Electronics Forum | Tue May 26 20:18:09 EDT 1998 | Justin Medernach
| | | | I'm reviewing my board fab spec. It calls for a minimum SnPb thickness of 50 microinches on HASL PWB's. I've looked at other specs that call out anything from 30 to 80 microinches, and others that just say the copper pad must be covered and
Electronics Forum | Thu Feb 04 18:16:53 EST 2016 | sonavc
Hi Thanks, help me to fix this old CP3. It ran great till now, I have problem the CPU board's Led HALF on . When the machine boot fine . it is good about 3 minutes then the CPU board 's Led HALF in always on. Turn off then back on sometime it is sho
Electronics Forum | Tue May 26 15:27:36 EDT 1998 | Dave F
| | | I'm reviewing my board fab spec. It calls for a minimum SnPb thickness of 50 microinches on HASL PWB's. I've looked at other specs that call out anything from 30 to 80 microinches, and others that just say the copper pad must be covered and s
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
