Electronics Forum | Fri Apr 16 10:34:29 EDT 2004 | kauer
A couple of questions for You. How old is this oven? Does it have a history of problems? When I have seen speed variations with our Omniflow 7s it is usualy the encoder but it usually spikes rather hard in one spot. You can see this physically and by
Electronics Forum | Thu May 27 13:45:24 EDT 2004 | pjc
An ECD OvenRIDER is an instrument designed to measure and record reflow oven parameters. It�s the only instrument I know that measures thermal transfer efficiency. www.ecd.com Contact your local ECD rep and they may have a demo unit they can bring
Electronics Forum | Fri Apr 27 11:01:36 EDT 2007 | pjc
Profiling is product specific. An instrument called the OvenRIDER from ECD is for soldering machine quality management. See link below. This instrument measures various parameters of your oven to include thermal transfer efficiency. The concept is,
Electronics Forum | Thu May 17 19:21:39 EDT 2007 | diesel_1t
We are currently using Oven Rider (ECD) to "verify" just the conduct of the peak temperature; we define which product is the higher runner for this line and then with the settings for this product (already profiled with thermal couples attached to th
Electronics Forum | Mon Jul 25 19:12:17 EDT 2022 | proceng1
I generally do not design an array larger than 10" x 12". Other than just thermal mass, the one issue to watch with extra length is if the array is so large that it spans multiple heat zones at the same time. We have panels that are up to 48" l
Electronics Forum | Tue Dec 13 12:56:17 EST 2005 | grantp
Hi, We have a problem sometimes where our soltec oven will accept another PCB too soon after it's taken the last one, so the PCB will collide with the last PCB that just enter the oven, and knock half the components off one of the boards, and destro
Electronics Forum | Tue Jan 13 21:00:15 EST 2004 | davef
This sounds like something the saleman of your new Vitronics oven should be happy to help you sort through. ECD [and probably other profiler supplers] provide software for playing with [optimizing?] recipes. In it, they allow you to select from a v
Electronics Forum | Wed Jul 31 10:03:44 EDT 2002 | gdstanton
Todd, Slim KIC 2000 would be my choice. We traded our Gold M.O.L.E for it and are very happy with the performance. The optimization program is great. No more guessing. The only thing I could gripe about is that it sucks up 9V batteries pretty quic
Electronics Forum | Mon Dec 03 18:30:29 EST 2018 | slthomas
Not sure how the lead screw drive gear is locked in place but is it possible that it's slipping in both directions (when driving the rail both forward and backward) and then not catching until after the other end has already moved some? You could h
Electronics Forum | Mon Dec 03 18:31:06 EST 2018 | slthomas
Not sure how the lead screw drive gear is locked in place but is it possible that it's slipping in both directions (when driving the rail both forward and backward) and then not catching until after the other end has already moved some? You could ha
