Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Thu Jul 27 22:27:45 EDT 2006 | seth
Vision X-Y maintenance procedure, please advise. I have problem with camera not park so often time, and I don't have any solution accept buying a new vision Y right stepper motor, but that's just too much money roughly 2500 dollars.
Electronics Forum | Tue Aug 01 18:12:18 EDT 2006 | SWAG
Check to make sure the platen and the camera are meeting the sensors that tell the machine they are "parked". Find these sensors and flag them. Look for indication they are working in the input screen. Also, make sure the sensor flags can go into
Electronics Forum | Tue Aug 01 22:33:36 EDT 2006 | seth
Let me ask you another question. Could this happen if either vision Y left or right not sync together? I checked the vision air regulator Left and Right it is set at 70 psi. My print is not being consistance, and I have to turn all my inspection off
Electronics Forum | Wed Aug 02 15:19:29 EDT 2006 | SWAG
Sounds like air pressure is set O.K. The next thing to check is that the platen surface that the x and y axis ride on is perfectly clean. After that, you should knock the camera off the platen and make sure that all of the small air nozzles are blo
Electronics Forum | Thu Mar 31 19:25:20 EST 2005 | bobpan
got it.....thanks ekra users for the reply's.......hahahaha
Electronics Forum | Fri Apr 01 07:31:48 EST 2005 | jax
I have X5's and we run standard SMEMA.
