Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Wed Jul 06 07:33:08 EDT 2016 | enovak
looking for tensions rollers for wiper paper for 2000 vintage EKRA E5 screen printer
Electronics Forum | Sat Feb 26 18:37:21 EST 2022 | oxygensmd
I am using SiPlace S20 and F4 machines. Both of them handle 0402 without problem. A newer machine, like S23 or S25HM is way better and accurate, S27HM can place smaller parts too. We are using EKRA E5 (2000) which can print this size without issues.
Electronics Forum | Sun Jun 10 05:35:54 EDT 2018 | oriolsancheza
2000 views and nobody can help me? Thank you.
Electronics Forum | Mon Jan 01 06:44:03 EST 2024 | micropak
We have an EKRA E5 and there's a E5 System Manual PDF available. I am not sure if it is a proper service manual, but it has electrical drawings. If you need, kindly send me an email. Happy New Year
Electronics Forum | Tue Jun 06 13:19:27 EDT 2023 | oxygensmd
It is really strange you don't have EKRA on your list. EKRA are really good for protos and mass-production too. We have E5, X5 and two X4Prof. X4Prof are lasting forever if you handle and maintenant them properly. ESP001 and Simplex softwares have t
Electronics Forum | Tue Jan 05 07:01:37 EST 2021 | djwave
Hello, thanks for your replys. Our EKRA E5 only boots and use the front computer (old PC with MSDOS and software), the rear one always is off, dont start when i switch machine power, dont know if is required for operate the EKRA. We turned on the EK
Electronics Forum | Fri Jan 03 00:22:02 EST 2003 | Steve
We have an Ekra E5 that uses what looks like standard auto valve stems to dispense the cleaning fluid. They leak.. Are they just standard schrader valves or are special to withstand the chemistry of stencil cleaner?
.gif)
