Electronics Forum | Tue Sep 30 14:06:16 EDT 2014 | nicodj77
Hi Dustin, It happened to us once and it was something very simple. We did maintenance to the Squeegee head and the problem was that the Squeegee head cover was not put back in place correctly, so it was interfering with the Squeegee up/down movement
Electronics Forum | Thu Oct 02 04:39:08 EDT 2014 | oxygensmd
I had the same problem with my E5. At first check the cover and valves in the squeegees head. For me wasn't help, I didn't found any fault, jamm. In my machine there is two adjustable valve over the transport at output-vent. I tried to readjust the
Electronics Forum | Mon Sep 29 15:28:29 EDT 2014 | dustin
After getting the last issue I had fixed through here. I thought I would try to see if there is a solution for another issue. I have and ekra e5 screen printer and it has a problem with the blades not dropping when they should. If I set up single dir
Electronics Forum | Tue Nov 29 01:11:34 EST 2005 | ajay
I am looking for purchase of EKRA E4 spare from nor EKRA agent. part detail - BELT 80222B-20 L=1835MM 5011000002 Any contact pl. confirm. ajay
Electronics Forum | Tue Nov 29 06:23:44 EST 2005 | stefwitt
Very likely this is a Brecoflex belt: http://www.brecoflex.com/
Electronics Forum | Wed Sep 26 18:05:59 EDT 2001 | Chrisp
Printer: Ekra E5 xl 24 x 30. Simple machine. Oven: BTU Pyramax 98 24" belt standard.
Electronics Forum | Mon Jan 01 06:44:03 EST 2024 | micropak
We have an EKRA E5 and there's a E5 System Manual PDF available. I am not sure if it is a proper service manual, but it has electrical drawings. If you need, kindly send me an email. Happy New Year
Electronics Forum | Tue Jan 05 07:01:37 EST 2021 | djwave
Hello, thanks for your replys. Our EKRA E5 only boots and use the front computer (old PC with MSDOS and software), the rear one always is off, dont start when i switch machine power, dont know if is required for operate the EKRA. We turned on the EK
Electronics Forum | Fri Jan 03 00:22:02 EST 2003 | Steve
We have an Ekra E5 that uses what looks like standard auto valve stems to dispense the cleaning fluid. They leak.. Are they just standard schrader valves or are special to withstand the chemistry of stencil cleaner?
Electronics Forum | Thu Jun 23 02:14:12 EDT 2016 | nikkilouie
hi guys, is there anyone know how to repair this error "maschine nicht ansprechbar" or "machine unresponsive". This error is from EKRA E5. thanks for any help..