Electronics Forum | Wed Mar 30 14:56:13 EDT 2016 | jsouth
We bought an ekra x5 at auction and the hard drive was pulled (due to the classified nature of the boards the company was producing)... i was told if i could find some one willing to make a clone of their hard drive (we are willing to supply the hard
Electronics Forum | Fri Sep 26 19:26:17 EDT 2014 | magan
Hi Everyone, I have an Ekra x5 printer and I'm having reference drive issues with my printer. If anyone have english operator/service manual for ekra x5? I'll be happy if someone can send me the manual for this printer. Thank you
Electronics Forum | Tue May 31 15:39:58 EDT 2016 | jsouth
I'm looking for a clone of an ekra x5 hard drive...we are willing to provide the hard drive and compensation for your time. ekra want us to upgrade the hardware to work with their latest software... they no longer offer the older version of software
Electronics Forum | Sat Oct 08 20:53:41 EDT 2022 | kumarb
Hi. Which Ekra model? I recall some funky registry keys being installed and we migrated our mechanical drive to a SSD but used a bit copier for the drives (Windows XP) which worked for us. Also, some calibrated data that will be machine specific.
Electronics Forum | Thu Nov 15 11:03:17 EST 2018 | bobpan
When our older Ekra machines wont reference.....we will either try to e-stop it and then turn the control back on and reference it again....or turn the machine off and back on. I would check all the sensors on the machine and also try to reposition
Electronics Forum | Thu Jun 11 16:29:37 EDT 2015 | chris_jayconsystems_com
I have an Ekra E4 stencil machine. When I transport a pcb into the machine. It will stop in the machine about 3-4 inches from the opening and go through the clamping procedure, like the machine went through the transporting correctly. It does this ra
Electronics Forum | Wed Dec 02 17:20:47 EST 2020 | kumarb
Hi. You say that you backed up the original drive. How? My suggestion: 1) Assuming that your HDD interface is SATA style - deploy a Samsung EVO series SSD which are very reliable. 2) Perform a bit-copy of the known good working drive so that the S
Electronics Forum | Thu Mar 06 14:35:09 EST 2025 | kumarb
Hi. Would anyone be able to offer advice on replacement gas springs for our Ekra X4 machine? The lid landing on my head was not a pleasant experience. If you have replaced these, have you used the OEM gas springs or 3rd party? Any reference part numb
Electronics Forum | Fri Jan 07 15:53:15 EST 2011 | tpappano
Both units have the 50 pin cable, but no drives are present. The service manual makes no reference to a disk drive (that I can find), is it possible that the floppy is a 'secret' factory tech-only service tool of some sort? Also, with the 50 pin cab
