Electronics Forum | Tue Apr 29 15:04:08 EDT 2014 | gregcr
Hi All, We will be building out a new production area and am looking for your opinion on what flooring system to install. We currently use ESD VCT tile that was installed about 16 years ago. The area will be SMT equipment as well as some assembl
Electronics Forum | Thu Jan 22 11:58:32 EST 2009 | davef
Brian: Does green painters tape present ESD issues? What does your field meter show?
Electronics Forum | Thu Mar 05 22:08:14 EST 2009 | mleber
The dewetting is caused by using a silcone based adhesive. Select a tape that is acrylic based. Tapes are a high esd generator. Always use an ionizer.
Electronics Forum | Thu Jan 22 03:25:26 EST 2009 | stevewilde
What masking tape can people recommend for masking the board when conformal coating. I am using a PVA autocoat machine and humiseal 1B31. Current tape, is leaving residue on board when used to hold link wires down whilst glue cures and also when used
Electronics Forum | Tue Jul 07 05:28:49 EDT 2009 | kpm135
In my experience tape is bad when packaging trays. I've always seen them packaged with the banded straps when coming from manufactures or brokers. For repackaging we either use ESD safe rubber bands or ESD safe velcro straps.
Electronics Forum | Thu Dec 15 17:30:42 EST 2005 | GS
Yes Davef, storage condition and long time remaining on shelf could effect pealing strength, but we experimented that by using Polystirene Carrier Tape also this problem was reduced almost to zero. Df, If I am not wrong when you talk about pr
Electronics Forum | Fri Dec 16 10:25:14 EST 2005 | GS
Hi Liza - polystirene monolayer (blend ?) could be sealed at less presure, ie 35-40 PSI. Temprature could be 165�-170�C. For sure after sealed you shoud make sure the sealing strength (peel strength)should meet min 15-25 N.(bet avg from 25 to 45 N)
Electronics Forum | Fri May 20 09:50:10 EDT 2011 | blnorman
Have you checked for ESD?
Electronics Forum | Thu Nov 15 11:30:17 EST 2007 | mt396596
Could anyone recommend an esd safe masking tape for conformal coating that does not use a silicone based adhesive? I have looked into 3M's 7419 series and am awaiting samples, curious if there is another brand out there people have used. Thank you
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
winsouce.jpg)