Electronics Forum | Mon Apr 04 12:39:00 EDT 2011 | gaz
This VIP70 has thermocouple inputs, so I'm hoping that's a good enough profiler. I tried a fairly different profile than you mentioned, so will test your settings today as well. If anyone has opinions, please jump in. Thanks!
Electronics Forum | Tue Apr 05 12:18:25 EDT 2011 | gaz
That's very helpful, and much appreciated. I know it's a long shot, but I don't suppose you know what paste they are using with these settings. I am testing with sn100c ws488. Thanks! kinos
Electronics Forum | Thu Apr 17 17:57:13 EDT 2014 | proy
Hello We use a 5 zone conceptronics HVN70 and never before have we had something we could not do including 6 layers Rohs complicated boards. Recently we had a larger - simple 2 layer board - all 1206's etc however there are 15 pcs of a LARGE high m
Electronics Forum | Tue Apr 19 07:23:39 EDT 2016 | clockwatcher
For ESD control in the factory we use foot & wrist straps, and ESD smocks. We also have ESD work surfaces including ESD flooring throughout the plant. We have been using ESD chairs and now the question has come up on if and how often these chairs nee
Electronics Forum | Mon Feb 05 21:56:58 EST 2024 | davef
Generally for ESD testing, conductive materials (1.0 x 104 ohms to
Electronics Forum | Fri Feb 24 14:10:16 EST 2006 | rsmith@z-mar.com
My company is an ESD firm. I have tested many different floors and sell ESD flooring and other products. With that said, here are my thoughts. Unsealed concrete is porous and tests in the 10 6th-8th range here in the southeast where we have decent hu
Electronics Forum | Tue Jul 16 04:38:23 EDT 2002 | bayanbaru
Hi, Is there any ESD system that do not requires the ESD wrist/heel strap testing? You see one problem we face is meeting the wrist strap testing compliance. There bound to have some operator fail to carry out the wrist strap test. How can we preven
Electronics Forum | Fri Aug 31 11:27:53 EDT 2012 | markhoch
We actually use a turnstyle that you'd see in a subway terminal, connected to an ESD Tester. All operators must pass through this turnstyle everytime they step out onto the production floor. If they don't pass the ESD Test, the turnstyle will not all
Electronics Forum | Wed Feb 14 14:58:14 EST 2007 | rgduval
Bill, Likely the latex isn't conductive, so charges will not be dissipated to the metal rack. Whether that constitutes an ESD risk or not will depend on the generative properties of the latex. I've never tested units inside my wash, so I can't spe
Electronics Forum | Mon May 09 03:59:34 EDT 2005 | Rob
Won't there be ESD & inspection problems with Martins dispensed all over the board? we only have 1 Martin here and he would fail an ESD test and a cleanliness test. Also he's considerably bigger than any board we make.
.gif)
