Electronics Forum | Tue Jan 09 06:45:08 EST 2018 | micomac
We have Europlacer flexys pick and place. We have had 3 turret collisions with 8mm feeders arising from the tape retaining clip coming free during operation. Have asked Europlacer for part numbers for safety catches that a technician told me existe
Electronics Forum | Fri Oct 01 14:06:08 EDT 2004 | russ
after we teach their positions We tape the sticks down. It is also helpful to make sure that you tighten the "discs" that are located on the tension rods. There are available if you desire guides and stops from Samsung that attach directly to the fe
Electronics Forum | Fri Oct 01 13:47:24 EDT 2004 | lgroves
Megan, Sounds like you are missing the adjustable guides on the vibe feeders- Please contact me directly so I can help you get them working correctly Larry
Electronics Forum | Fri Oct 01 13:04:09 EDT 2004 | dorklover664
The company that I work for just bought two new Samsung pick and place machines (CP45FV). I love them. But we are having problems with the vibe stick feeders that we have. They have no groves or slots for the parts so if the tubs move at all the pla
Electronics Forum | Mon Jun 26 09:33:07 EDT 2017 | bobpan
So I am assuming that you are using the IQ feeders option on the machine. First thing I would check is to make sure you don't have an older feeder on the machine. There was a certain point where quad feeders would be 'IQ' capable or not. You may have
Electronics Forum | Fri Jun 23 12:38:49 EDT 2017 | jamesn
Hello Please can someone help with a feeder Base Issue I get the message " Warning Base Manager 2 Runtime '7e' Error Wrong Message Parameter " I have swapped the removable bases 1 & 2 over but the fault still lies with base manager 2 I will than
Electronics Forum | Tue Mar 30 09:23:16 EST 1999 | Lars Jaeger
Hello, I'm a student assistant in a research project that deals with the simulation of PCB assembly systems. At the moment I collect information about SMDs. My problem is how to assign the correct feeder width to various devices in a simulation. Is
Electronics Forum | Mon Feb 14 17:36:37 EST 2005 | griinder
WE ARE USING MIRAE MX240. ON THIS MACHINE, THE FEEDER ADVANCE AND THE FEEDER PITCH IS CONTROLLED BY THE MACHINE/SOFTWARE AS OPPOSED TO THE FEEDER ITSELF. OUR SELECTIONS FOR 24MM FDDERS ARE 4,8,12, 16, AND 24MM.I WAS WONDERING IF THE 20MM PITCH WAS UN
Electronics Forum | Wed Nov 24 11:06:50 EST 2004 | ccleland
You might want to look into one of the machines from Europlacer or Mydata that have very high feeder capacities(200 or more) and intelligent feeders. They were designed for minimal change over time in high mix environments.
Electronics Forum | Mon Dec 02 02:29:16 EST 2019 | bane016
Problem solved. Burned electronic on cart.
.gif)
.gif)
