Electronics Forum | Sun Aug 08 11:15:32 EDT 1999 | Earl Moon
| | Mike, | | | | Got your message and those of others concerning PCB fab supplier evaluation and qualification check lists, etc. I have a severe problem here in WI as I can hardly access the internet, and when I do it is cut off abruptly for no goo
Electronics Forum | Wed Aug 11 18:36:03 EDT 2004 | davef
90 Knoop. Q2: Thickness is 4 to 10 u" for Au and 300 to 400 u" for nickel A2: This looks like a ENIG spec. Although, the Ni is quite heavy, 150 uin is sufficient for most applications. [IPC-4552 ENIG specification: * Gold thickness of 0.075 - 0.125
Electronics Forum | Fri Feb 24 11:31:20 EST 2012 | pauld
I need to be sure of the Nickel/Hard Gold thickness to be specified on our drawing. We use hard gold on a slip ring pcb that has brushes riding over the conductive surface, so soldering is not the issue. I read through the hard gold vs immersion gold
Electronics Forum | Wed May 30 17:49:49 EDT 2001 | davef
You are correct. IPC wants you to pay for that standard, regardless if you get a hard copy or download it. Generally, it�s pretty boring stuff for production types. [Although, you will recognize some of the goofy things your designers have done to
Electronics Forum | Tue May 29 12:35:36 EDT 2001 | genny
Dave, Sorry to drag this out some more. When I saw this thread I realized that we often get PWB's fabricated with a gold plated edge connector tab. However we have not ever given any specs to the fabricator regarding the gold plating - all we say i
Electronics Forum | Tue Dec 14 17:02:04 EST 1999 | John Thorup
Hello Kris If you do have and OSP coating I'd say Curtis has nailed it. But you seem to have references to gold. Does this board have a standard nickle/gold finish. If so what sort of "solder on gold" problems were you having? Reading between the
Electronics Forum | Wed Mar 16 06:46:59 EST 2005 | -=Verm=-
Hi lads long time no post... I have an issue with a PCB, its a PCI card that we manufacture for a customer of ours. The customer is seeing a problem with contact on a PCI card with the motherboard, the PCI card is removed from the board wiped and th
Electronics Forum | Wed Apr 21 17:08:32 EDT 2004 | dave
Congratulations on your new customer. This could be a keeper. Here's what you're familiar with: Electroless Nickel - per MIL-C-26074 and ASTM-B733. Electroless nickel describes the plating of nickel deposits, which may contain phosphorus and boro
1 |