Electronics Forum | Fri Feb 01 07:21:32 EST 2019 | dfl
One of my 8mm feeders is blinking the red led after the pick-up. With both buttons the motor works as expected (forward/backward), but after the nozzle pick-up the motor moves forward and then the red led blinks. pressing the buttons the green led l
Electronics Forum | Thu Apr 22 05:16:44 EDT 1999 | Ross Clunie
To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. Thankyou.
Electronics Forum | Fri Feb 01 12:52:31 EST 2013 | ericrr
Interesting enough, it did turn out to be alignment, maybe the machine is getting bend & twisted just like people do when they get old....... or maybe I should say as the beam gets less intense with old age the sensor needs to be readjusted to pick u
Electronics Forum | Thu Jan 31 09:07:25 EST 2008 | aj
Hi, we have the same problem here but have a solution. We have Fuji FIP3 machines but this should be the same for all - use the tube that the parts are in for part presentation ! i.e. cut out a window big enough at the top of the tube for the nozzl
Electronics Forum | Wed Apr 02 17:52:41 EDT 2008 | fsw
Sr. Tech, We have a IP III on one of our lines. We were hand placing an Samtec SMT connector MMT-108-01-T-DH series. I asked our SMT tech to get the IP to place it & he said we need tabs on the connector. So we got the "tab" version. Now he is not a
Electronics Forum | Thu Apr 22 11:11:44 EDT 1999 | Jimmy Strain
| To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | Thankyou. | What size? An 8x4 is going to index a lot more times than 32x
Electronics Forum | Fri Apr 23 00:50:06 EDT 1999 | KEVIN SIMPSON
| | To save me re-inventing the wheel can anybody tell me an average no of pick-ups that can be expected from a Panasonic MV feeder before Feeder TPM should be carried out. | | | | Thankyou. | | | What size? An 8x4 is going to index a lot more time
Electronics Forum | Tue Apr 07 12:47:09 EDT 2009 | rodrigo
Hi All, Our CP6-4000 machine has this weird issue that happens once in a blue moon and only on table two. Lets say it is going to pick up a part from feeder 10. Well, it doesn't stop at the right position. It is slightly off so the thing pushing dow
Electronics Forum | Fri Feb 13 10:13:56 EST 1998 | Simon Washer
Has anyone running the cp4-3 feeders (MC type) in 8 by 4 td flavour seen excessive wear on the aluminum body caused by the tape leaf cover and tape leaf retaining clip?? These are the black anodised aluminum feeders (new type) that we run on all cp4
Electronics Forum | Sat Dec 03 01:07:29 EST 2022 | poly
I've got access to the universal manuals / voyager but I haven't found a section that describes the feeder teach setup process, I can pick up the teach slug onto the conveyor and then get into feeder teach but if I teach the corners of the slug as t
