Electronics Forum | Wed May 25 17:17:45 EDT 2005 | Nicholas Anderson
Hello all!! I currently have this thought, of maybe producing my very own type of feeders. Say juki,panasonics,etc. but building,design,and production of my own. What would be preventing me from doing so? Let's say i wanted to build a Fuji CP-4 feed
Electronics Forum | Fri Dec 11 19:52:39 EST 2015 | dontfeedphils
I've dealt with MyData, Assembleon, Fuji, and Juki over the last 9 years with the majority being MyData and Juki so I'll talk about them. MyData was very nice for high mix/low volume due to the ease of setup and smart feeders, but I felt like I was
Electronics Forum | Wed Feb 13 07:00:59 EST 2013 | spoiltforchoice
Low-Medium volume and Low Budget are difficult for others to quantify. I'm not familiar with GEM's but if the AX-201 suggested above can use your existing feeders its obviously got a leg up on the competition. Otherwise, to some extent your choice mi
Electronics Forum | Thu Feb 27 15:21:37 EST 2014 | idscraigsmith
My company uses a Juki KE-2020L and a Juki KE-1070L pick and place. I am trying to locate feeder trolley's with feeder banks that would be compatible with these machines but am having a hard time finding anything. Anyone have suggestions of where t
Electronics Forum | Tue Mar 27 10:12:16 EDT 2018 | jandon
Does the component supply count setting do the trick? We have picked simultaneously same part number in two different feeders with our KE-2020L.
Electronics Forum | Fri Mar 23 19:50:57 EDT 2007 | Frank
Possible head combinations to pick from multiple 12, 16, or 24mm feeders. Note: you can not mix feeder sizes for simultaneous picks. KE-2010 and KE-2050 will use 1&3, 2&4, or 1&4 KE-2020 and KE-2060 will use 1,3,R or 2,4,R or 1,4,R I prefer to s
Electronics Forum | Sat Jul 17 15:22:17 EDT 2004 | rohman23
Thanks for all the responses. I do agree with what was said, and can certainly see reasons not to try. I'll write a little more about what we do. We are a defense contractor, and as I mentioned very high mix, low volume. We only have 1 SMT line.
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
| 1 |
