Electronics Forum | Wed May 25 12:09:52 EDT 2022 | stevemiles
Hi, I've had this problem with two DEK Horizon 03i printers. The first time it was the camera (firewire) causing the PC to freeze. The second time it was the firewire card in the PC that was the problem. Try moving the camera firewire cable to a d
Electronics Forum | Sat Sep 13 09:55:05 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can repair the Green firewire camera (Cyberoptics) off the Dek printers. I had 2 go bad and would like to get them fixed if possible so I would have backups. Thanks in Advance
Electronics Forum | Mon Sep 22 11:26:19 EDT 2008 | mainenetservices
Does anyone out there know of anyone who can > repair the Green firewire camera (Cyberoptics) > off the Dek printers. I had 2 go bad and would > like to get them fixed if possible so I would > have backups. > > Thanks in Advance I can repair
Electronics Forum | Mon Oct 24 09:07:58 EDT 2016 | robl
Could you make up your own adaptor cable to connect to your programmer, then fit a small form connector like a Firewire on the edge of the PCB? It should only take up about 7x7mm of real estate as opposed to a 2.54mm 5x2 pin header 12.7 x 5.08, or a
Electronics Forum | Tue Jan 09 14:41:55 EST 2018 | bsyeo
Hi All, Need some help on this. We have a strange problem with our Dek API. There is no camera vision but everything is able to initialize well. The vision works occassionally but most of the time it does not. We have checked the nextmove card, int
Electronics Forum | Sat Sep 06 07:20:37 EDT 2014 | gascon5383
I have an issue with this DEK printer our company has been having for over a year now. It seems that DEK can’t narrow down what the issue actually is as well. The printer is a DEK Horizon 03i 09 SP13 P02. We are having an issue with the camera.
Electronics Forum | Fri Aug 28 11:39:23 EDT 2015 | dlee87
I have an issue with this DEK printer our company > has been having for over a year now. It seems > that DEK can’t narrow down what the issue > actually is as well. The printer is a DEK Horizon > 03i 09 SP13 P02. We are having an issue with
Electronics Forum | Sat Jun 22 07:38:58 EDT 2019 | emanuel
We have a printer with Hawkeye 1700. The PCB side sometimes returns a distorted picture. It happens erratically, can be at startup or after a while, sometimes the machine works full day without problems. The only way to restore operation is disconnec
Electronics Forum | Mon Apr 19 21:37:17 EDT 2021 | ouaret
dear all, update: we got that the calibration of SIM is the problem, the distance between SIMs need to be calibrated. can someone help us get the manual that describe on how to calibrate the SIMs? we have a problem with our cyberoptics AOI machine
1 |