661 focusing results

Electronics Forum: focusing (Page 1 of 67)

GSM Camera Focus

Electronics Forum | Wed Aug 23 16:37:07 EDT 2006 | flipit

If you bought this camera from Universal, it should come focused correctly. I had one of the first 0.5 mil cameras for flip chips. I used it for years and it was out of focus. I finally convinced Universal that something was wrong and they replace

GSM Camera Focus

Electronics Forum | Wed Aug 23 09:25:32 EDT 2006 | SWAG

I just installed a new CCD in a 4.0 mil upward looking camera - GSM. It's working well but is slightly out of focus. Do I adjust focus by moving the lense in and out of the camera mount or do I use the ring that is actually part of the camera that

Focus PEC Camera on GSM?

Electronics Forum | Tue Jul 19 14:03:03 EDT 2022 | ttheis

Reading up I see there is a fixture (part# 1212100) but I am not able to find any information on this. Has anyone ever adjusted the focus of the PEC camera? Anyone know what this fixture looks like? One of our machines is out of focus but still able

GSM Camera Focus

Electronics Forum | Wed Aug 23 12:41:35 EDT 2006 | chrisgriffin

On the camera lens, there should be a ring to adjust aperature and one to adjust the focus. Sometimes an extension piece is needed between the camera and the lens.

Fein Focus X-Ray Systems - Third Party Support?

Electronics Forum | Wed Mar 28 12:29:32 EDT 2018 | gregcr

Contact Joe Sitter: joesitter2010@gmail.com I believe he is in Arizona. Very knowledgeable on the Fein Focus machines.

How do I adjust table height EKRA X5 Screen Printer?

Electronics Forum | Tue Aug 04 13:45:03 EDT 2020 | oxygensmd

There are one value for thickness during PCB-teach function which is the PCB thickness. The other one is the camera focus in machine option but it is a dangerous function because the camera focus is adjusted by raising/lowering table.

GSM Camera Focus

Electronics Forum | Fri Aug 25 11:00:37 EDT 2006 | SWAG

Thanks for the advice. This is not a Universal camera. I removed the lense from a "blown" camera and installed a new CCD that I bought from a camera shop. I only see one ring that can be adjusted on the camera itself. Not sure if it's aperture or