Electronics Forum | Tue Aug 23 14:25:50 EDT 2005 | pjc
Here's the oil: BIO 30 - Biral Industrial oil (operates to +300�C ) BIO 30 is an extremely high quality synthetic industrial oil for a wide number of applications. BIO 30 leaves no carbon deposits and is highly resistant to oxidation. An outstandin
Electronics Forum | Wed May 26 15:02:40 EDT 1999 | Paul Bonstrom (SGI)
Looking for help in finding suitable high temp gasket for use in smt assy support application. Gasket used to restrain flex on smt module in area prone to localized heating due to nearby device removal (hot air). Current gasket mtl (neoprene) degra
Electronics Forum | Tue Aug 23 14:23:00 EDT 2005 | pjc
Most ovens I know use oil to lubricate conveyor chain, not grease. Anyway, is this what you're using: NMG No Melt Grease NLGI 2 (operates from -20�C to +270�C) NMG is a long-fibred highly adhesive grease which does not melt or drip at high temperat
Electronics Forum | Wed May 26 16:36:02 EDT 1999 | John Thorup
| Looking for help in finding suitable high temp gasket for | use in smt assy support application. | | Gasket used to restrain flex on smt module in area prone | to localized heating due to nearby device removal (hot air). | | Current gasket mtl (n
Electronics Forum | Wed Aug 30 16:00:42 EDT 2000 | Dave F
Russells: You can mix the two solders you mentioned, assuming by "96s" you meant "96Sn / 4Pb". If you heat the two tin / lead alloys to a liquid state, you�ll form a tin / lead solution with properties different from either of the two solders. The
Electronics Forum | Wed Oct 17 02:04:39 EDT 2018 | robl
SCC3 has an operating temperature of 200C, as long as it is heat cured at 100C. https://www.electrolube.com/pdf/tds/044/DCA.pdf It's also a silicone so needs to be coated & cured away from anything you value. Otherwise there are plenty of PU's and
Electronics Forum | Fri Nov 25 14:52:50 EST 2011 | davef
Sn43/Pb43/Bi14 is a low temperature leaded alloy that has been used with very good success. The low melting point helps avoid some thermal shock issues on some assemblies. A word of caution, this alloy forms a low melting point at approximately 95*C.
Electronics Forum | Fri Apr 10 20:27:07 EDT 1998 | Jean-Paul Clech
| I am currently involved in a reliability project related to SMT QFP and TSSOP fine pitch solder joint reliability. I have decided to use a temp chamber for stress testing. Is there a test standard that covers this? I am also a bit unsre as to wheth
Electronics Forum | Mon Nov 20 04:39:19 EST 2000 | SV
Hello, I have to design a PCB for which the customer have the following temperature requirements: -55degC to +85degC operating temp. -61degC to +125degC storage temp. My question is: does the FR4 material meet this conditions? Which are the parame
Electronics Forum | Wed Nov 01 22:58:31 EST 2006 | davef
Durastone is commonly used in flooring. Durostone is a proprietary product of R�chling Permali Composites SA [be aware this is a French company] that many use for reflow and SMT process pallets. Suppliers are: * R�chling Permali Composites SA; Canog