Electronics Forum | Sun Mar 26 20:14:12 EST 2000 | dave
I'm looking for a extension arm to fit on a Zevatech 8mm feeder which will allow us to use a 13" reel instead of the standard 7" reel. Does anyone make these or will I have to buld my own???
Electronics Forum | Wed Mar 29 17:10:25 EST 2000 | Jon Wentz
Hi Dave, What feeder model do you have? I took a quick look in my parts list manual and again, depending on your feeder model, you might be able to buy the needed part(s) from Zevatech/Juki. Have you checked with them yet? For example, the main feed
Electronics Forum | Fri Jun 24 22:36:17 EDT 2016 | yokywong
now days, I face a problem for JUKI electric feeder and machinery feeder. i do not know about any of electric feeder. until now, we all use machinery feeder for CF081ER 7' real holder and 15' real holder,CF03HPR ,FF12FS,FF16FS,AF24FS-OP. but this tim
Electronics Forum | Tue Jan 12 08:06:43 EST 2010 | kpm135
basically the rule of thumb for the 8mm feeder is that you only want one component exposed in the pocket at a time. If you see more than one component exposed you need to go down in size. The reason for this is that if there is another component expo
Electronics Forum | Tue May 01 13:52:51 EDT 2007 | jasont
plz advise if the below feeders are compatible on CSM 46/60 (are they downwards compatible?); 1. Philips series FV-84-xxxxxC, model PA2903/70 (2,4 pitch, 8mm) QTY=29 2. Philips series FV-82-7-xxxxD, model PA2903/73 0603-type (2,4 pitch, 8mm
Electronics Forum | Fri Mar 31 21:44:47 EST 2006 | fastek
Correct....if the feeders you purchased have 7" pans then they will work fine on a CP-6 or CP-7. If the pans are 13" and they are truly CP-6 feeders, they won't work on a CP-7. If you need to change out your pans I can help. I have a bunch of 13"
Electronics Forum | Thu Sep 26 16:29:02 EDT 2002 | pjc
Because most placement machine mfgs' feeders vary in width sizes its best to get the reference from them. Like how many 8mm slots does their 16mm consume, and so forth. Std. Sizes I've seen are: 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, 10
Electronics Forum | Tue Jan 31 15:54:50 EST 2006 | vickt
PWH FYI...All current cart shipments are 13" reel compatible. A few single lane 8mm feeders is not a bad thing to have along with the 7" DL, as they can handle both. T.Vick UIC
Electronics Forum | Tue Feb 15 14:25:08 EST 2000 | Sergey
Dear Sirs Good business day! I need the following feeders for CSM60 machine: - Stick feeders: 1. 20 mm x 1 2. 13 mm x 3 3. 8mm x 7 - Tape feeders: 1. 16 mm, 9" x 7 you seems to be have not this 2. 24 mm, 9" x 3 3. 32mm, 9" x 1 - Manual tray feeder
Electronics Forum | Tue Oct 05 13:21:02 EDT 2004 | secme
Contact's new C5 platform is an excellent machine. I found that it is superior in value due to several points. 1. one machine capable of 192 8mm feeders. 2. Feeders that are capable of being adjusted from one size to another with little effort. R