Electronics Forum | Sun Mar 21 22:03:35 EST 1999 | Nick
It looks like your holders now require some maintenance. You will need to throughly clean all the holders of all dirt debris and then relube the holder lightly with T&D or grease. You will only need to lube the shaft of the nozzle change enagager an
Electronics Forum | Tue Mar 25 02:53:25 EDT 2008 | vincentng68
We sell fuji spare parts. We have the nozzle holder. If you want, please e-mail me.
Electronics Forum | Tue Jan 30 10:20:20 EST 2007 | mee
you need to clean the holders
Electronics Forum | Fri Mar 12 23:05:37 EST 1999 | Joe Cameron
Has anyone got problems with their Fuji CP6* holders sticking and not indexing the nozzles? We find about 2 or 3 holders seizing up on us every two weeks or so. It's really frustrating, not to mention the damage it can cause on the machine and the
Electronics Forum | Mon Jun 24 14:52:40 EDT 2013 | ryansmta
I am in need of two Fuji or Panasonic "tape and reel" holders. I will be using them to hold dummy 0402 and 0201 outline components which have undergone some special treatment and packaged in tape and reel. This is not for SMT application but for s
Electronics Forum | Thu Jul 31 14:07:44 EDT 2014 | kurtiss
I found a bad solenoid and replaced it solenoid 15 on station 11. The machine is still erroring out. I also checked the holders and sensors and they seem to be ok. This error occurs when ever the machine tries to change nozzle sizes on any holder. T
Electronics Forum | Tue Mar 25 05:35:58 EDT 2008 | fujillews
Hi We have large stocks of New Fuji Spare parts for all types CP2-7,IP1-3,QP1-3, XP & NXT. We have the parts you are looking for. see Alternativesmt.com for information or contact me on Llew@alternativesmt.com
Electronics Forum | Thu Mar 27 14:03:03 EDT 2008 | vikkaraja
Thank you all for your help,but my boss could not wait any longer. He ordered from Fuji.
Electronics Forum | Sun Jul 11 21:10:27 EDT 2010 | fujiphil
First, check the sensors for 17th and 19th station....tune the sensor amplifier if necessary. Then, check the dogs on the nozzle holders... If the above, items are ok... check the 13th station clutch engagement. Calibrate if necessary... fujiphil
Electronics Forum | Tue Feb 21 18:32:12 EST 2012 | skatemo
Hello estimated Someone can help me with a problem that I have in one cp643 which marks the stations 17 and 19 of almost all the holders, already there changed the amplifiers of both stations and were calibrated but it follows the problem. Thanks.
winsouce.jpg)
