Electronics Forum | Thu Mar 30 23:30:19 EST 2006 | smtuser1234
Call Fuji HA HA
Electronics Forum | Fri Apr 07 03:10:20 EDT 2006 | Roland G
Check firmware version and Fuji upgrade reports because it could be a sofware bug. I remember also 1 random failure on IP1 which was hard to identify: a cable in raceway connected to placement table was getting contact failure when table moves.
Electronics Forum | Fri Apr 07 09:26:36 EDT 2006 | engguy
This is common with older Fujis. The machine is trying to download production data to the host(MCS?) If the cable is not connected or if the MCS is off, the machine will randomly freeze at the end of prod. Either solve those issues or change the m
Electronics Forum | Mon Apr 17 09:01:55 EDT 2006 | engguy
Measure the voltage from phase to phase, not to ground or neutral. I have never seen 380VAC in the US. Are you outside the US?
Electronics Forum | Thu Mar 30 14:00:32 EST 2006 | jdengler
Hi Bert, There should be an action occuring when the machine hangs-up(ie: Q motor rotating, getting ready to change nozzle, or other action). See if you can find this. The first thing that comes to mind is a loss of the signal for a nozzle in the
Electronics Forum | Thu Mar 30 13:27:53 EST 2006 | bvdb
Just before Christmas we bought a used Fuji IP1 cheap. It took us a while but it's been working great for about a month. Yesterday the IP1 stopped after completing a board but before exiting the board out the conveyer. No error message, no alarm be
Electronics Forum | Fri Apr 14 03:27:07 EDT 2006 | bvdb
The latest news. We ran another production run for 1-1/2 hours. The IP-1 gave a "memory NG" fault indicator twice after fully completing the first and second PCB's. We've been running the tray speed at 30% but noticed that the speed of the tray ro
Electronics Forum | Fri Feb 19 03:50:34 EST 1999 | Steve
Hi Brent, Fuji has a solution to solve your problem. The solution Fuji has is called "Independent Function" and this function keeps working rest of module even though one module stops due to parts run out. But this function requires hardware modifica
Electronics Forum | Fri Feb 19 03:51:04 EST 1999 | Steve
Hi Brent, Fuji has a solution to solve your problem. The solution Fuji has is called "Independent Function" and this function keeps working rest of module even though one module stops due to parts run out. But this function requires hardware modifica
Electronics Forum | Sun Jun 19 20:20:50 EDT 2005 | fastek
I might be over simplifying this but what I understand is the AIM is a more economical version of the NXT and that AIM will replace the XP platform.
