Electronics Forum | Thu Jul 09 12:47:09 EDT 2009 | janz
Hello, We are using F4G software for our Fuji machines. We've 5 machines plug into PC. Recently we tried to connect PC to local network but this only after while close C/C server without possibility to reopen C/C server. Reseting PC gives C/C lice
Electronics Forum | Tue Jul 02 10:27:31 EDT 2019 | BigFuji642
I tried using the cable on page 4. The DB9 to DB25. Is that the correct one to use with a USB to DB9 adapter? What is the difference between using MCS and C/C for communication? Which one should I be using and how do I see which one is being us
Electronics Forum | Fri Nov 22 10:18:33 EST 2002 | Joaquin Rodenas
Dear Mr. Liang I'm a service ingeneer in a distributor of FUJI products. My first suggestion is get some help from the FUJI dealer in your territory, but anyway try the following: First of all, check again the FTP tool included in F4G-main windows
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Sat Feb 16 22:19:11 EST 2013 | mdang
Hi, I bought a fuji Flexa v4.6.0.7 and hook it hook it up with CP65 machine. The flexa system already have CP65 configure so I can see the production program on the machine and delete them but I can not transmit a new program to the machine. It error
Electronics Forum | Wed May 26 05:58:50 EDT 2010 | chrislyttle
Hi, first time posting on here. We've recently acquired additional Fuji machines to add to our line and have moved premises to a new factory. I've been trying to set up a new factory line in Line Editor to use two of our existing machines (Fuji GSP
1 |