Electronics Forum | Sat Jul 25 04:48:40 EDT 1998 | Stoney Tsai
Hi, good friends I found this site is so wonderful to learn SMT techniques meaningfully. We now employ 3 Fuji GL-541 dispensors and raw material with Soma IR-120. but we found glue string casually. From my experience from trouble-shooting the cabinet
Electronics Forum | Wed Jul 29 17:43:26 EDT 1998 | Steve A
| Hi, good friends | I found this site is so wonderful to learn SMT techniques meaningfully. | We now employ 3 Fuji GL-541 dispensors and raw material with Soma IR-120. but we found glue string casually. From my experience from trouble-shooting the c
Electronics Forum | Tue Mar 18 07:53:39 EST 2003 | Paul Staniford
I am looking at dispensing solder paste using a Fuji GLV glue dispenser. This is to enable us to produce prototype pcb's without the need to purchase a stencil. Has anybody tried this before? If so what problems should I expect to encounter.
Electronics Forum | Thu Dec 28 09:49:18 EST 2006 | slthomas
Tough call without seeing the board, but here's my best guess. You don't say if the glue dot is greater in height or diameter in the locations where you have printing (silkscreen), but I would guess that you might get either, or both, depending on ne
Electronics Forum | Thu Dec 28 22:39:49 EST 2006 | i want to learn from u
i just thought that it because of difference thickness between the silkscreen and without silkscreen. if we apply the same pressure and dispense time to this two difference location, the glue size will be difference. location with silkscreen will rea
Electronics Forum | Thu Sep 02 10:35:46 EDT 1999 | Gian.D
We are assembling double side pcs reflowing (smt) on top and by wave on bottom. After first step (smt) we dispense glue on the bottom side putting one or two glue dots under small components and we cure in oven before wave. After wave soldering we f
Electronics Forum | Wed Dec 27 23:04:10 EST 2006 | i want to learn from u
Most of pcb have white/black printing at bottom side of them to indicate the chip location. Normally, this printing are the same location to the place that glue will be mount. My problem are the glue size between the point that have printing and not
Electronics Forum | Tue Nov 07 23:53:52 EST 2006 | mike white
Panasonics HD range of glue dispensers are good for this kind of job. I suppose the placement machines you have may also determine the dispenser machine. If you have Panasonic placement machines for example a Panasonic HD machine may fit into the foo
Electronics Forum | Wed Sep 20 16:14:20 EDT 2006 | flipit
Asymtek (Nordson), Precision Valve, Creative Automation, GPD, IJ Fisnar, Janome
Electronics Forum | Wed Sep 20 16:23:13 EDT 2006 | realchunks
Can you change your process to screen printing?
