Electronics Forum | Mon Jul 31 14:51:31 EDT 2006 | bhu
Can anyone suggest a supplier for gold solution when replating gold fingers that had solder on them?
Electronics Forum | Fri Jan 22 09:20:29 EST 2010 | jrr3434
Is there anyway to get solder off gold fingers besides replating them?
Electronics Forum | Thu Jan 13 12:07:24 EST 2000 | Tony Nirchi
Gold finger connector over a wave solder, what would be the best way to protect the fingers from solder.This is a high volume job.
Electronics Forum | Fri Jan 22 16:16:17 EST 2010 | stepheniii
My old boss bought some stuff to clean the lead off of gold fingers. At least that is what he thought it did. What it really did was remove the gold fingers. And quite well I might add. The short answer to your question is no. And if you replate mak
Electronics Forum | Thu Oct 28 17:46:44 EDT 1999 | Gary Kemp
My company manufactures memory modules and I'm finding solder specs on the gold fingers following the reflow process. We are using a no-clean solder paste. The spec sheet warns against crossing the 140 degree C mark during the soak stage, preventin
Electronics Forum | Tue Aug 01 08:43:20 EDT 2006 | russ
Try the circuit repair corporation www.circuitrepair.com
Electronics Forum | Tue Aug 01 07:40:11 EDT 2006 | davef
Check the fine SMTnet Archives, like: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=9250
Electronics Forum | Wed Aug 02 08:09:51 EDT 2006 | Steve Gregory
Go to: http://www.hunterproducts.com/micro-metallizer.htm It's great system and you don't ever have to worry about spilling the solution.
Electronics Forum | Fri Jan 22 14:18:21 EST 2010 | davef
Search the fine SMTnet Archives to find threads like: * http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=5127 * http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=9250
Electronics Forum | Fri Jan 14 09:36:49 EST 2000 | Richard
If the gold fingers are pad types which plug into expansion slot connectors, I have used a titanium guard attached to the wave conveyor over the solder pot, which allows the PCB to connect to the fingers but masks the solder from the gold pads along
.gif)
