Electronics Forum | Tue Jun 12 02:58:53 EDT 2007 | d0min0
HI, thanx for opinion ;) tried Searching but obviously did some mistake in 'words' and got 0 results ;p I've already tried high temp solder - but it's damn difficult to solder TC to the component... I'll try aluminium then...but from what I rememb
Electronics Forum | Mon Oct 17 13:02:28 EDT 2016 | tdemon69
i have a MPM2000 now giving me 0 - hardware limit warnings..let me start off by saying that is was giving me x axis limit problems, so i replaced the x card with diff card. set all the switch and jumpers to x card , then i got 0- hardware . so then
Electronics Forum | Wed Jun 26 04:00:30 EDT 2019 | SMTA-David
Thanks, I'll take a look. Something else I found was the Z height for the module was set to 1.7mm but I am picking up the part on the PCB surface which is only 1.0mm from PCB being loaded, therefore the part must have been let got 0.7mm above PCB an
Electronics Forum | Mon Oct 04 15:37:52 EDT 2004 | russ
Probably one of the "incompetent idiots" but we have 4 Samsung machines, 1 CP45FV, 2 CP20CV, and one CP40CV. I have never owned or operated a Contact Systems Machine. As far as the Samsungs We as a company have had great success with these machines
| 1 |
.gif)
