Electronics Forum | Tue Mar 27 04:23:27 EDT 2007 | donjohnson
You know the products operating limits,and these have been pushed out during development using Highly Accelerated Life Testing (HALT) 2> Proof of Screen has been conducted to ensure that wear out failures are not induced by the screen If the above
Electronics Forum | Sat Aug 26 03:18:15 EDT 2017 | ausplex
Mid-production our KE-730 halted and gave us a “SUB CPU1:BUS ERROR” message on the video monitor. Then we got on the same monitor a detailed error message with address and byte information (unfortunately I didn’t copy the details). Now when we boot
Electronics Forum | Mon Nov 07 08:01:03 EST 2016 | ttheis
I have seen people use large, modern hdd's but they need to be re-sized to the limit of the hardware you are installing into which can be tricky. Also, its best to take an 'image' or clone an hdd as soon as you get equipment that is old or you suspec
Electronics Forum | Mon Jul 10 09:32:35 EDT 2017 | georgetruitt
You need to find a machine that has a camera with adjustable focal height. Fixed cameras can inspect most smt components but soon reach their limits when it comes to inspecting taller components like thru hole. Yes, there are many AOI machines out
Electronics Forum | Fri Mar 06 19:32:09 EST 2020 | SMTA-Alex
The fact, that your Hydra head goes up and then starts moving slowly, means that it didn't find the limit. Since there are no mechanical obstructions and you swapped all the boards, the things to look at are cabling. Double check the ribbon cables fo
Electronics Forum | Mon Oct 05 17:07:31 EDT 2020 | dekhead
Older machine models (Horizon / Infinity) allowed you to offset the board stop (thru crative programming) to run the larger board with parameters for the smaller board. That feature is eliminated with the Micron series. However, if you can get remote
Electronics Forum | Mon Mar 21 09:33:25 EST 2005 | davef
RoHS Substance||RoHS MCV Limits||Typical Testing Approaches Lead||1000 ppm* ||Wet chemical digestion followed by ICP (Inductively coupled plasma) or AAS (atomic absorption) spectroscopy ||||XRF (X-ray fluorescence) spectroscopy Cadmium||100 ppm ||Wet
Electronics Forum | Thu Feb 13 09:35:35 EST 2020 | jactomas
Since 6 days we are tryng to solve a issue in our MyData12. For some reason, the TpSys doesn´t start properly and continuesly is rebooting after a message "MMI exited, status = 134, terminating servers - Waiting for Tpsys to finish - MMI returned 13
Electronics Forum | Thu Aug 19 11:58:12 EDT 2010 | davef
From "Universal Instruments Packaging Specification" ... [snip] Packing Of Populated Boards · These parts require individual separation and protection to prevent electro static discharge and structural damage. They shall be packed in sealed, anti-st
Electronics Forum | Thu May 05 09:50:29 EDT 2005 | patrickbruneel
Hi Hannu, You just gave a very realistic and practical view of the lead-free dilemma. The main reason that your coil coating doesn't get removed is because of the inability of lead free alloys to wet the surface and conduct the heat. Higher temperat