Electronics Forum | Tue Jul 31 18:46:40 EDT 2007 | rpadilla
Well, everyone has provided good advice, but if you are looking for a wave flux that can provide much better dwell times and consistent wetting throughout the hole fill, without making adjustments to your production process, I suggest going with Senj
Electronics Forum | Thu Jul 19 04:23:38 EDT 2007 | chrispy1963
You dont mention if it is ONLY occuring with the A12 or is it other tools as well? Only spring tools or Stiff ones? Regardless of that, the small X Wagon motor is controlled by the track ball and the bigger X Axis motor is controlled by the joystic
Electronics Forum | Fri Jul 20 10:44:56 EDT 2007 | gmoritz
If you bought it from an equipment dealer ... OK, the dealer has come through and is (allegedly) sending a full compliment of documentation to arrive by Monday. > ... they need weekly maintenance ... > ... you WILL need parts for it. ... > Do you
Electronics Forum | Fri Aug 10 18:43:18 EDT 2007 | mika
I think I still have the Service manual for 4796 if You are interested. If so You can have it for free. This is the manual that UIC/Sanyo tech engineers use, but maybe it is no good for you since it will req. training on the machine and also know exa
Electronics Forum | Wed Aug 29 09:37:06 EDT 2007 | ed_faranda
I am a heavy, PanaPRO user. In fact, I have been using PanaPRO for many more years that I am willing to admit. Lets just say, I remeber when PanaPRO was called PanaTools. I am not famular with the PanaPRO DSM module. I use PanaPRO IPO to generate
Electronics Forum | Tue Sep 25 17:42:11 EDT 2007 | gsala
your comments will be appreciated, please; IC tests have been performed on two kind of Raw PCBs (HASL) samples by adopting three different methods : First Sample (supllier A) - Omegameter 600 SMT, solvent=40�C: extratcing time 10 min result = 0.2
Electronics Forum | Fri Sep 28 18:16:19 EDT 2007 | allgood
Rob Thats really helpful, thanks. You are right in that I am looking at both ends of the spectrum, Manex is to be honest a lot for us to consider but if it really would do the job we could stretch that far. We bought CircuitCam from Aegis years ag
Electronics Forum | Wed Oct 17 09:19:23 EDT 2007 | actech
This box has the I/O card mounted sideways under it's own cover on the side of the main box. The CPU card is the bottom card. The Two driver cards X/Y and R/Z are side by side and mount to a steel base pannel with there relays at the back. but even i
Electronics Forum | Mon Nov 12 09:37:17 EST 2007 | russ
You need to perform process a capability study prior to putting these controls into place. Cleaning a stencil after each pass will get ugly, solvent residues remaining in apertures etc. 2D inspection is good. Change paste every hour will get very
Electronics Forum | Tue Nov 20 09:50:07 EST 2007 | rgduval
Only on the bottom side? Run that side first . We usually determine our run process based on the heaviest components, and propensity for falling off during the second reflow process. If there's only the one BGA on that side of the board, we'd tend