Electronics Forum | Wed Sep 04 08:53:27 EDT 2002 | dphilbrick
Thanks Dave
Electronics Forum | Wed Sep 04 14:38:04 EDT 2002 | slthomas
Thank you for not mispronouncing that phrase ala Wayne's World. We here in the Seattle area are sensitive to that stuff, ya know?
Electronics Forum | Wed Oct 27 19:55:01 EDT 2004 | davef
We talked about a similar "Blue Haze ( Not the same as Purple Haze)" awhile ago http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=21401 The BIG difference is that yours is soluable.
Electronics Forum | Fri Nov 07 12:48:31 EST 2003 | rholland
I have seen in the last couple of months more boards with a white hazing under the solder mask. I ran a few tests on a board to determine the cause of the white hazing underneath the solder mask. First I confirmed, or at least I think I confirmed, t
Electronics Forum | Sat Mar 14 15:48:40 EDT 2015 | horchak
The white haze is definitely an indication of moisture being trapped in uncured or improperly applied solder mask. You can verify this by heating up the board using a heat gun on an area of the board with the white haze, and if it clears up that is t
Electronics Forum | Wed Mar 01 17:03:56 EST 2000 | Dave F
Steve: Someone is trying to trick you. He/she is trying to be very smart, but he/she didn�t anticipate this "dark haze" coating problem. I suspect that this person is someone you speak with every day in your plant. They may be the one that came-u
Electronics Forum | Wed Mar 01 17:03:56 EST 2000 | Dave F
Steve: Someone is trying to trick you. He/she is trying to be very smart, but he/she didn�t anticipate this "dark haze" coating problem. I suspect that this person is someone you speak with every day in your plant. They may be the one that came-u
Electronics Forum | Tue Sep 03 17:48:34 EDT 2002 | dphilbrick
My customer is finding a blue haze on some SMT pads after processing, kind of looks like a water spot on the surface of solder joints. It requires 20x mag and very good lighting to see. We have done 2 different ionic tests and the boards pass to clas
Electronics Forum | Mon Nov 07 19:33:10 EST 2011 | swag
We have four pick and place machines all exibiting a residue that seems to build up over time on wiring and electrical components. This residue appears as a white haze on wiring, caps and fuses (these are the components where it is most obvious). Y
Electronics Forum | Mon May 07 20:02:42 EDT 2001 | pzohbon
Does anyone know of a good manfacturer or supplier of fiducial cleaner pens. We are seeing a haze left behind on our current cleaners.
