Electronics Forum | Wed Jun 15 16:54:33 EDT 2005 | linny999
Siemens is an excellent platform. To reduce your scrap:- Carry out the specified maintenance, especially the segments and valve plungers; Calibrate revolver heads to benchmark. Remove the tables, smooth the magnetic strips, clean the mounting faces,
Electronics Forum | Wed Mar 29 18:57:09 EST 2000 | Dreamsniper
Some manufacturing companies, specially those in the small and medium scale find it hard to decommission/scrap equipment specially if they can still use them even though these equipment are giving them head aches on downtime and quality. I just would
Electronics Forum | Wed Dec 20 07:08:51 EST 2006 | cyber_wolf
We have had this happen. The Z-ball screws do go bad in IP3's. We replaced the ball screw and the problem went away. As mentioned improper belt tension will cause the servo to make loud noises. But if you say the movement is rough, then the ball scr
Electronics Forum | Thu Jul 25 21:58:20 EDT 2002 | davef
How do you �physically remove the solder from the fiducal prior to disposing of the balance of the rail�? We don�t HASL our fiducals. Easier to see with vid head. If you need to HASL your fiducals, consider: * Disposing of the rails with your scra
Electronics Forum | Fri Jul 31 12:53:58 EDT 2009 | dyoungquist
On our Mydata machine, we place a piece of scrap bare pcb next to the pcb we are loading. Using double sided tape, we attach the cut tape strip to the bare pcb, then program the machine to pick up the parts from that location. The smallest Mydata m
Electronics Forum | Mon Oct 10 08:02:01 EDT 2022 | furman
Dear Friends, we scrapped our Siemens Siplace 80 S15 FS02 and removed all mechnical parts, heads, Servomotor and steering PCBs. Additionally, we have brand new 2x8mm fast feeders NEW (unpacked but never used). If anything is needed please contact
Electronics Forum | Fri Nov 04 22:03:35 EDT 2011 | machinehead
Yeah that is a drawback to those feeders. The > plastic part that is mentioned in one of the > responses is okay but you have to be real careful > when pulling the tape out before you can put that > part on. Mydata always says to leave the reel
Electronics Forum | Wed Oct 01 15:24:55 EDT 2014 | horchak
are you trying to lengthen or shorten the lead length? Lengthening the amount of lead being cut off and going into the scrap tube will shorten the lead length. Lead length is pretty much determined by the down stop setting on the insertion head, the
Electronics Forum | Fri Mar 28 15:08:37 EDT 2008 | jmelson
Hello, all, I have been having problems with bent push rods on my Philips CSM84. I have caught it a couple times when it happened, but it happens so fast I still don't know exactly what the sequence is that causes this. The push rod is clipping a
Electronics Forum | Sun Nov 09 21:52:26 EST 2008 | phomann
Hi, I have acquired a Fisnar I&500 Solder Robot that has not come with the expected manuals and software. The machine is a 2001 vintage. CAn anyone help me with obtaining the operating/service manuals for the base unit. I have managed to get the m
