Electronics Forum | Tue Aug 23 13:35:23 EDT 2005 | SuMoTe
I should read this closer before I post it. It should read "Lead" paste not "Led" paste. This is grease for the screw shaft that brings the rails in/out on the reflow oven.
Electronics Forum | Sun Aug 28 22:15:45 EDT 2005 | iwan
I agree with Pete, I prefer to use High Temp Lubricant. Because it more clean compare to High Temp Grease. Usually i only do a few drip for 3-5 days, because purpose of lubricant is to make chain & shaft smooth.Since Biral is expensive lubricant i us
Electronics Forum | Fri Apr 03 07:08:30 EDT 2020 | compit
Asssembleon recommends Molykote 6169 (Yamaha #6169) grease for pneumatic components of heads, but it is no longer available. What do you use instead?
Electronics Forum | Mon Apr 06 04:42:37 EDT 2020 | richardcargill
Shell Alvania 2 ( or current equivalent )
Electronics Forum | Thu Aug 18 12:46:43 EDT 2011 | jdengler
In the center of the head shaft there is a rod that is used to flag 2 sensors at the top of the shaft. This lets the machine know when a nozzle is attached. Check that the sensors are working correctly and the rod moves freely. The sensors are fib
Electronics Forum | Mon Jul 18 10:40:09 EDT 2005 | geb
Thanks for your help. Solved it - The spindles on the head were stiffer than the other heads, so greasing it fixed it.
Electronics Forum | Thu Sep 13 17:29:02 EDT 2007 | fnorradd
I am currently having a problem with uncut legs on one side of axial components from a universal dual head insertion machine. Initially it was thought that the anvil on one side was engaging slow so I stripped down and changed the seals in the botto
Electronics Forum | Wed Jan 23 18:57:09 EST 2019 | nikevoo1
Is it possible to have too much grease on mechanical valves and because of that something has been clogged? Or mechanical valve O-rings to be a problem? https://imgur.com/a/ZHShMAH https://imgur.com/a/SzAWIL0
Electronics Forum | Tue Sep 29 09:39:02 EDT 2015 | rgduval
Hey, David, For service, check out 4TechUSA over in Detroit. It's not Chicago, but, you're closer to Detroit up there than I am down here in Houston :) For your issue....do you have access to the UIC Knowledge Base? The first issue I found in the
Electronics Forum | Sat Aug 18 22:43:14 EDT 2012 | eadthem
we service all of our lightning spindles once a year, Take the spinldes off. loosen the screw by the nylon cap and slide the locking pin out. run the spindle shaft, the nylon cap and pin assembly , and spring thrue a ultrasonic cleaner with 99% is
