Electronics Forum | Sat Feb 15 10:25:50 EST 2014 | jdengler
Can the oven do 400C? If so do them in the oven. Jerry
Electronics Forum | Mon Feb 24 11:24:36 EST 2014 | cyber_wolf
Nothing is locking up or sticking. It's just getting cruddy.
Electronics Forum | Wed Jun 16 08:16:27 EDT 2021 | shmevan91
Hi, Could anyone shed some light why a mk5 13 zone heller ovens rail width won't auto adjust? has to be done by hand every time we change product. The board support rail will adjust just not the main rail, have tried swapping the two cards around bu
Electronics Forum | Mon Sep 27 06:43:59 EDT 2021 | sophyluo1985
Some thoughts of GOLDLAND: We recommend that you choose Vitronics or Heller brands. They are the most popular machines in the world. According to the long-term plan, your equipment needs maintenance and replacement parts in the future, so their parts
Electronics Forum | Thu Jun 17 18:01:07 EDT 2021 | bmalhi
Please check mechanical side if lead screws turning freely, binding screw could be the issue. Electrically please check if edge width motor is getting the required voltage. New ovens have the overload relay and the circuit protection fuse. Please con
Electronics Forum | Fri Jun 18 09:53:51 EDT 2021 | shmevan91
Hi, we have checked all of those and beenm in contact with heller but they said they will need to send an engineer out as they are also out of ideas, was hoping someone might've had the same issues as we have two ovens doing the same thing, wont move
Electronics Forum | Tue Jul 21 07:59:14 EDT 2020 | spoiltforchoice
We went Heller in the end, a combination of the brand the price and the support helped us make the choice. The profiling we have done suggests the short(ish) zones you get in a 1707Mk5 are pretty even and if you go though the Heller literature you'l
Electronics Forum | Tue Aug 16 23:29:52 EDT 2011 | ckyien
Hi, my company is looking for SMT lines. Currently our target for reflow oven is Eightech Tectron Lead free and Heller 1809MK3. Kindly please share your comments of pros and cons of these machines. Also please recommend other brands and models. Than
Electronics Forum | Thu Feb 13 08:08:41 EST 2014 | cyber_wolf
The manual says to bake the edge chains at 400C to clean them. Is anybody doing this ? I need to take my edge chains to a heat treat facility to clean them ? I don't want to spray oven cleaner on them as they appear to be plated with nickel or so
Electronics Forum | Sat Feb 15 10:31:53 EST 2014 | marcpeo
Sorry to say that most top out at 350 deg. Best to have it done outside. Is the chain locking up or not moving smoothly? If no signs of sticking then maybe no need to heat at all.
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
winsouce.jpg)