Electronics Forum | Tue May 21 13:56:05 EDT 2013 | jayjjackson
I'm looking for heater panels ,4500W , 220/440V for our conceptronics reflow oven.
Electronics Forum | Tue Dec 06 17:04:25 EST 2011 | simmy
Look for 2 pairs of heaters for a Heller 1800s oven. Anyone know of any available?
Electronics Forum | Sat Jun 23 15:02:19 EDT 2012 | davef
Someone told me that Heller Industries heaters and 350*C blowers have a lifetime warranty. * Check the Heller Industries site * Talk to your Heller Industries sales-type.
Electronics Forum | Tue May 18 14:47:02 EDT 1999 | Dave F
| Looking at the full convection reflow oven market, I see two segments, high mass heater ovens (i.e. Electrovert Omniflow,...), and low mass heater ovens (i.e. Heller,...) | Did some of you guys did some testing on both types and what were your find
Electronics Forum | Sat Jan 10 12:14:26 EST 1998 | eyal dickerman
I'm suprise that you are not evaloating HELLER ovens ,It is the best ,relaible oven in the market for more than 5 years. They are using the same heater/blower technology from the same manufacturer for years... HELLER offers LIFE WARRENTY for the heat
Electronics Forum | Tue May 16 15:16:26 EDT 2006 | Chunks
Not knowing your brand of Heller, I might suggest disconnecting the first cooling section to verify it's your heater fans. I just had a retro kit done to my Electrovert for a similar thing.
Electronics Forum | Fri Jun 06 15:12:05 EDT 2008 | tomwho
Can anyone give me a contact for someone who sells used vitronic reflow oven parts. I am look for heater panels or heater wire for a vitronics smr-820 reflow oven,or some place that can replace the heater line in them. Thank you
Electronics Forum | Thu Jul 15 22:03:07 EDT 2004 | KEN
In no particular order: Will the failed joints wet when touched with an iron + flux? Is there flux surrounding the joint (post reflow). If no, you may be baking it out premateurely. Is this assembly wave soldered? Where is defect discovered in yo
Electronics Forum | Sat Sep 26 02:09:39 EDT 2015 | aemery
Proc My field service back ground included Electrovert so I know reflow electrical quite well. I've worked on Heller, Conceptronic and Vitronics over the last few years and really there isn't a huge difference if you can read a schematic. I checked
Electronics Forum | Mon Sep 14 20:19:33 EDT 2020 | kumarb
Hi. 1) recommend to phone up Heller for assistance on this case 2) using the wakeup profile, can you confirm if the problem remains or not when you skip the warm up of zone # 2? 3) each zone is based on 2 heaters (this is what we have on our 1809e
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
4 Vreeland Rd.
Florham Park, NJ USA
Phone: 973-377-6800
