Electronics Forum | Thu Oct 09 06:06:09 EDT 2008 | leeg
You need an automated machine? We use the manual Hi-Check 500
Electronics Forum | Sat Sep 11 13:45:23 EDT 2021 | kojotssss
Hi, check the Land pattern 0201 on the board, compare with another 0201. Could be different gap.,
Electronics Forum | Tue Nov 05 16:20:45 EST 2002 | rubenh
Hi Check SMT Research, they have nozzles for cp3, 4,6,7 melf custom, Special etc..(805) 587-7851 Just buy the disk, the body is the same and change the nozzle size on (proper) mcs16 or 30
Electronics Forum | Fri Jun 03 01:35:37 EDT 2005 | v4pinta
Hi, Check http://www.qtek.ie/Screen%20Rolls.htm Part No. 2660 works fine with us, 21 Euro
Electronics Forum | Tue Jun 28 02:37:17 EDT 2005 | grantp
Hi, Check to make sure your paste is not dried up, and it should roll across the stencil, not slide. Also, if your running in a cold environment, then that can stiffen up the paste, and it will still to the blades, and not roll over the stencil corr
Electronics Forum | Mon Mar 15 18:03:21 EDT 2010 | smt_guy
hi, check the home sensors if they are working specially on the right side rail of the camera where you had the failure.
Electronics Forum | Fri Jan 07 15:09:09 EST 2011 | brianangus
Hi. Check the 5V PSU supplying the VME rack. Make sure you have 5V and not something like 3v. try removing the ISA card from the PC and try a different ISA slot in the pc. Hope this helps. Brian.
Electronics Forum | Mon Jul 06 17:25:01 EDT 1998 | Dave F
| Help!! | There has to be someone out there other than Cyberoptics. Not that I think they don't have good equipment but I would like at least to have other companies to compare prices and features. If you have any names and numbers I would appreci
Electronics Forum | Thu Apr 11 04:03:28 EDT 2002 | mwoodall
The Alpha metals Hi Check 500 is used to measure paste deposit thickness. The paste height is found from a micrometer reading determined by focussing a beam of light on a track adjacent to a paste deposit and then onto the solder paste. I've measure
Electronics Forum | Tue Aug 03 13:46:46 EDT 2010 | davef
2 Benchtop paste inspection * Synapse 3D Master 3000neo Desktop SPI Machine [Synapse Imaging; Room#102-505, SK VENTIUM, 522, Dangjeong, Gunpo-si, Gyeonggi, South Korea; 82 3 1436 0430 http://www.synapseimaging.co.kr] * ZC1000 [PTS System (S) Pte Ltd
1 |