Electronics Forum | Fri Sep 22 12:37:18 EDT 2000 | jonyoder
I am having problems with SMT electrolytic capacitors expanding and changing values after going through our reflow. The reflow profile we use includes temperatures of 200 deg C for 60 seconds and 230 deg C for 30 seconds. We need to use this profil
Electronics Forum | Wed Jun 03 13:50:32 EDT 1998 | Chrys
| Can anyone tell me if there is a reference for smt component height specs on the bottom side of a board, which will also go through wave soldering. A current design I am reviewing has tant caps(7343) and a crystal on the back side. Should I only b
Electronics Forum | Fri Mar 26 17:12:17 EST 2004 | ben
I have recently encountered a new pcb design with a very high density of components on either side of the pcb. One of the suggested "fixes" is to use the smt pads as vias i.e. the via will be drilled thorough the centre of the smt pad. My concern i
Electronics Forum | Mon Feb 22 10:01:01 EST 2010 | jtsyeung
Since the inductor is electro-magnetic, that means the device is composite of coil and ferrite metal. The inductor inside the reflow oven meets with blower motors which close to the inductor and generate magnetic field. With such conditions, Lawren
Electronics Forum | Mon Dec 20 07:09:03 EST 1999 | Christopher Lampron
Ron, The simplest way to process fexible PCB's that I have found is to use a process carrier fixture. There are companies that manufacture process carriers that are capable of holding flex through stencil, placement and reflow. The carriers are capab
Electronics Forum | Tue Jun 10 09:46:28 EDT 2008 | dyoungquist
We run a high mix/low-medium volume smt line with MPM SPM stencil printer, MyData pick-n-place machine and a Heller reflow oven. That combination is working well for us.
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen
Electronics Forum | Wed May 27 14:35:52 EDT 1998 | Justin Medernach
| | R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recomm
Electronics Forum | Thu Apr 01 10:49:14 EST 1999 | AF Ng
| Has anyone heard of a problem with catastrophic failure of | large value (200uF) solid tantulum capacitors that have been | exsposed to high humdity. | I suppose that with water moisture seep in the capacitor, the risk is very high that abrupt o
Electronics Forum | Thu Apr 01 14:00:17 EST 1999 | Ron Beasley
| | Has anyone heard of a problem with catastrophic failure of | | large value (200uF) solid tantulum capacitors that have been | | exsposed to high humdity. | | | I suppose that with water moisture seep in the capacitor, the risk is very high tha
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
3 Road Xintang， Fuhai Street，Fuyong
Shenzhen, 30 China
Phone: 13713862102
