Electronics Forum | Fri Jan 21 11:28:39 EST 2011 | nucleartoast
I worked for Electrovert for 20 years and up till today the 1421 is still the oil of choice. The chain doesn't care who's oven it's running in but it does require regular lubrication.
Electronics Forum | Tue Aug 11 16:18:41 EDT 2009 | dyoungquist
Oberon (oberonlube.com) makes a high temperature chain lube (oil). When our Heller oven was installed, we were told to use this as the replacement when our original volume of chain oil ran out. I do not know the price for it.
Electronics Forum | Fri Mar 08 16:30:53 EST 2013 | pctech
We have 1880 Heller about 12 years old and running like a charm everyday. I doubt that lead or non-lead operations will have anything to do with it. Do you use high temperature lubricant on edge hold chain and rail periodically? This may help to ease
Electronics Forum | Wed Aug 03 10:14:59 EDT 2005 | Wonderboy
With oven temps rising due to Lead-Free Processing, I'm looking for some information on high temp Reflow Oven lubricants. I've found some info in the Fine SMTnet Archives on Chain Lubricants, (Mostly Synthetic Motor Oils), but I'm wondering what othe
Electronics Forum | Tue Aug 23 14:23:00 EDT 2005 | pjc
Most ovens I know use oil to lubricate conveyor chain, not grease. Anyway, is this what you're using: NMG No Melt Grease NLGI 2 (operates from -20�C to +270�C) NMG is a long-fibred highly adhesive grease which does not melt or drip at high temperat
Electronics Forum | Tue Dec 01 17:50:43 EST 2009 | swag
This is cut and paste from a Conceptronics Document - hope it helps you: Following are the lubricants recommended for oven maintenance: 1. To lubricate the conveyor chain use: A. Biral BIO30 -synthetic high temperature oil (highly recommended)
Electronics Forum | Sun Aug 28 22:15:45 EDT 2005 | iwan
I agree with Pete, I prefer to use High Temp Lubricant. Because it more clean compare to High Temp Grease. Usually i only do a few drip for 3-5 days, because purpose of lubricant is to make chain & shaft smooth.Since Biral is expensive lubricant i us
Electronics Forum | Sun Oct 13 22:19:28 EDT 2002 | mikestringer
Hi Everyone What lubricants do your maintenance people use for the chains in your Reflow ovens? The manuals for our ovens have one recommendation - but I am always open to other people�s experiences and recommendations. Another option may be easie
Electronics Forum | Fri Mar 05 15:24:55 EST 2004 | mrmaint
I have soaked the chains in a 5 gallon bucket with wd40. It does a great job cleaning the chain. After they are done soaking i take an air gun outside and blow the chain off. I found that using a medium temp lubricant does not cause alot of buildup o
Electronics Forum | Wed Oct 03 23:42:32 EDT 2018 | gaintstar
SMT Reflow Oven Factory http://www.flason-smt.com/product/SMT-Reflow-Oven-Factory.html Introduction of SMT Reflow Oven Factory: 1. Windows XP platform, user friendly interface and easily swap between bilingual of English & Chinese. 2. Digital contr
