Electronics Forum | Thu Sep 05 14:44:41 EDT 2019 | jbaez1
Looking for Pack Driver or driver unit 630 119 8361 from HSP4797 (Universal, Sanyo or Hitachi): Tag information: Pack Driver Model: D2890B S ver. 0.16 W ver. 0.00 Made in Japan
Electronics Forum | Tue Sep 16 09:29:19 EDT 2003 | Graeme
Jan When you fit these new unit drivers check to see if the software level is the same as what is in the remaining unit drivers, as if it is not you will find that there is a steady failure of other exsisting unit drivers.If the software level in the
Electronics Forum | Wed Sep 08 11:30:49 EDT 2021 | kumarb
We can vouch that UTSOURCE was excellent in assisting in the repair of some obscure farm equipment for a local farmer. Their Hitachi (original) LCD display driver was blown on a number of PCBs but was able to source the replacements through this port
Electronics Forum | Wed Sep 10 09:56:18 EDT 2003 | vickt
5 years ago (mostly likely 7-8 yrs). Most of these failures can be attributed to simple overtemp conditions or mechanical stress. Customers who do not keep the cooling fan filters clean on their machines tend to see a higher failure rate due to highe
Electronics Forum | Wed Sep 10 10:13:37 EDT 2003 | qp1
Dear Please the name and the conditions of this swap program Thanks
Electronics Forum | Wed Sep 10 06:31:32 EDT 2003 | qp1
Dear We have several 4796HSP in production We often have problems with the driver card D2332, S-ver1.32 Wver0.11 For replacement they are quite expensive Can someone tell me how to avoid this problem or how to repair these cards Or is this a known p
Electronics Forum | Mon Sep 26 18:46:37 EDT 2005 | stano
Hello. We have problem with MPA-V. Problem is with V1, V2 axis. Error is V1 AXIS MOVEMENT IMPOSSIBLE and V2 AXIS MOVEMENT IMPOSSIBLE. On the driver for this axis lighting error LED ST (sensor touble). It is problem in connection between motor encoder
Electronics Forum | Tue Mar 20 00:02:00 EDT 2007 | Darby
Some causes of skewing. If you have exhausted all mechanical problems for that head. Pickup data from tray is incorrect. If you aren't picking up in the exact centre it is possible that the component is being skewed after vision adjustment i.e. cent
Electronics Forum | Tue Sep 16 10:06:51 EDT 2003 | qp1
Thanks very much for all your advises We certainly are a step forward Please if yoiu have some more advises ,send them to me
Electronics Forum | Sat Mar 04 11:07:21 EST 2006 | charls
hi pavel, If you are getting vibrate during fast mode, encoder or motor cable might be faulty. yes i faced the same problem in Juki KE2010 m/c. Try by replacing encoder & motor cable from Motor to driver unit. All the best
.gif)
winsouce.jpg)
