Electronics Forum | Fri Mar 12 23:05:37 EST 1999 | Joe Cameron
Has anyone got problems with their Fuji CP6* holders sticking and not indexing the nozzles? We find about 2 or 3 holders seizing up on us every two weeks or so. It's really frustrating, not to mention the damage it can cause on the machine and the
Electronics Forum | Sun Mar 21 22:03:35 EST 1999 | Nick
It looks like your holders now require some maintenance. You will need to throughly clean all the holders of all dirt debris and then relube the holder lightly with T&D or grease. You will only need to lube the shaft of the nozzle change enagager an
Electronics Forum | Wed Apr 09 03:21:36 EDT 2008 | fnorradd
Hi Steve, The adjustable workboard holders are a mixture of universal and aftermarket, they do not use the clamp down arms which were originally with the universal pbs holders, they are the type which have two grub screws holding the clamps to the h
Electronics Forum | Tue Apr 08 09:56:58 EDT 2008 | slthomas
Is it a factory (Universal, Panasonic, etc.) holder or aftermarket? We used to use Fancort holders on our Universals and they're definitely still around.
Electronics Forum | Mon May 07 22:25:21 EDT 2001 | Doug Kester
Has anyone heard of a single or double tray holder plate for Siemens Siplace equipment (either OEM or aftermarket). This would be similar to the Universal, Quad, and Zevatech platens for trays that just clip on to the feeder holders. Have only a co
Electronics Forum | Wed Jan 18 15:21:58 EST 2006 | adlsmt
FYI, if you are using 13" reels, for 8mm parts, you need a different feeder with a larger reel holder. If you get the larger reel holder and if you are using quick change carts, you need the cart for that type of feeder as they also make one that doe
Electronics Forum | Fri Mar 03 07:24:57 EST 2017 | karolis
Manncorps MC110 is AUTOTRONIK BS110, just sold on Manncorps name. We are using same printer for 3 years. Frame holder will brake soon, when using 29"X29" holder. But you just need to add U profile on holder (for strength)and fix it with few bolts. A
Electronics Forum | Tue Jun 19 17:42:38 EDT 2007 | dyoungquist
We run a TP9 machine and had a very similar problem with it. On a TP9 machine there is a power supply board where all the voltages are generated. It is located on the bottom side of the unit. The problen was with one of the fuse holders. The co
Electronics Forum | Wed Oct 31 12:24:21 EST 2001 | Stephen Zhou
We are designing the SM fixture for small PCB, does anybody know where we can get the spring holder which can hold the PCB to the fixture? Who is the manufacture for this part? Thanks in advance. Stephen
Electronics Forum | Wed Aug 14 11:59:12 EDT 2002 | jseagle
I am trying to find a removable tab to place between a coin cell battery and the + contact of the battery holder. We want to have the battery installed in the holder and have the user remove a tab to enable the battery. Thanks James