Electronics Forum | Mon Jul 01 09:33:08 EDT 2019 | dbuschel
if you can't change the PCB materials or design at this point, you might be able to reduce it somewhat through the use of fixtures or edge stiffeners. Unless it is a particularly thick board, I don't think the reflow profile would be the issue. The t
Electronics Forum | Mon May 13 23:44:26 EDT 2019 | dami0629
if use tray cannot solve the problem, you can change from the design 1)Reduce the effect of temperature on PCB 2) PCB USE HIGH TG 3) BOARD THICKNESS TOO THIN 4) MODIFY THE BOARD SIZE 5) Reduce the V-CUT depth.
Electronics Forum | Mon Jun 27 12:02:47 EDT 2022 | proceng1
I have never used a VP oven, but I did get a pretty good demo of one and was pushing hard for my company to acquire one. The issue ended up being that there was not an East Coast distributor for the "juice" and that became cost prohibitive to get sh
Electronics Forum | Mon Jun 27 14:44:47 EDT 2022 | kelvinchoong
Hi Sir, The VP Machine that i am currently using takes reference from its own temperature sensor. so most of the time i would have to adjust multiple times for my PCB to soak at the right temperature or reflow for the duration that i need it to. Fo
Electronics Forum | Mon Jun 27 08:18:47 EDT 2022 | kelvinchoong
Hi All, Appreciate any inputs that may be given. Currently i am operating VP6000 Vapour Phase Reflow Oven from ASSCON. Over the last 2 years, we have around 100 different Recipes for many different PCBs. Each recipe is adjusted(6 Different Paramete
Electronics Forum | Thu May 27 16:23:12 EDT 2004 | davef
Process Trials Procedures. Standard trials are often conducted on reflow ovens by production engineers during product assessment, machine approval or in process set-up. The following trials are also used by machine suppliers during equipment develop
Electronics Forum | Wed Mar 29 04:14:49 EST 2000 | Marc
Charlie B: You mentioned that you have an air conditioned environment and a RH 0rf 50, baking the boards is predominately done when the history of the PCB delivery and / or previous storage conditions are un known. When I was with a CM, we did this a
Electronics Forum | Sun Jun 09 21:10:11 EDT 2019 | don_julio
In our reflow oven it has pins which move at the predetermined speed to move the pcb through the various zones in the oven. The forward row of pins is fixed along the front of the oven. The rear set of pins is adjustable per the width of the pcb. We
Electronics Forum | Fri Jan 27 09:00:14 EST 2012 | davef
A thermocouple is a set of two wires welded together at one end, where a junction is formed between the two wires. Because each wire is composed of a different type of metal, each wire reacts differently to the temperature of the junction. Because of
Electronics Forum | Tue Mar 09 07:06:42 EST 1999 | Charles Stringer
| | | | I need to setup an oven to run with a nitrogen atmosphere for | | boards with BGA's, but our ovens do not have the optional atmosphere monitor and controller. Is there a good way to sample and control the atmosphere without the optional bui