Electronics Forum | Thu Mar 01 11:22:17 EST 2007 | ausajid
hi is any body very good in programming for hsp4796a or hsp4796b. i am stuck in one thing and want any body to help me out. the problem is i am using alternate feeder alonghwith alternate carrige. i want machine to go on alternate feeder first and i
Electronics Forum | Thu Mar 01 18:24:37 EST 2007 | jaimebc
Set FEEDER AXIS in the box of the label ALTERNATE MODE at the OPERATION DATA display. ( to get there go to PROGRAM EDIT/OPERATION DATA/ then press next page. For reference look in your operation manual 3.7 ALTERNATE MODE.
Electronics Forum | Wed Sep 10 10:13:37 EDT 2003 | qp1
Dear Please the name and the conditions of this swap program Thanks
Electronics Forum | Wed Sep 10 09:56:18 EDT 2003 | vickt
5 years ago (mostly likely 7-8 yrs). Most of these failures can be attributed to simple overtemp conditions or mechanical stress. Customers who do not keep the cooling fan filters clean on their machines tend to see a higher failure rate due to highe
Electronics Forum | Wed Apr 28 10:32:19 EDT 2004 | vickt
This was not a automatic feature of the 4796 series HSPs. You can try to continue to reset-start the feeder crg after each component missing event,and slowly build the remaining placements, but at some point you will reach a dead end. My best advice
Electronics Forum | Fri May 16 13:43:29 EDT 2003 | T.Vick
Yukim, Just another thought (way off the solder paste trail that you've been on so far)....Are the parts similar in thickness? The 4796 and 4797 HSP's have a closed loop function that compensates for variations in component thickness based on fe
Electronics Forum | Wed Sep 10 10:25:48 EDT 2003 | r_astom
Jan, Please see our webpage regarding these programs for further details. http://www3.uic.com/__852568c80050acb1.nsf/0/f5455502658b71cc852569ca0045b8cd?OpenDocument The part number for the refurbished Unit Drive in question is 630 111 8123. Also,
Electronics Forum | Wed Jan 19 10:44:23 EST 2005 | russ
Although I have not personally run or programmed either the Universal or the Fuji to any great extent, I have worked in factories that have utilized each type. One had 4796 machines and the other used Fuji CP3, 4, 4-2, 6, 643. As an observer I am d
Electronics Forum | Wed Jun 11 16:30:33 EDT 2003 | T.Vick
You have received some great feedback so far. I would like to summarize and add a few points regarding maintenance. You should start (as recommended already) by verifying your component library data. Using the default values from the master library i
| 1 |
.gif)
winsouce.jpg)