Electronics Forum | Mon Dec 05 09:14:14 EST 2022 | peterm
Invoke. The PTF Setup Procedure dialog box displays. 4. Select Product. The Select Product File dialog box displays. 5. Select the same product used in the Open PTF Teach Product section above. 6. Enter the Slot number for the PTF and select Full
Electronics Forum | Sun Dec 12 08:39:32 EST 2004 | davef
The reliability of the measurements provided by your instrument is indicated by consistency. This is a process control tool. it does not provide absolute measurements. It does is not tie to the NBS, er whatever they use in the land of the frozen t
Electronics Forum | Mon Oct 13 17:05:35 EDT 2003 | MA/NY DDave
Hi The answer is yes, These moles, as you called them, are designed more as process control test instruments than true representations of the products that you will process. By The Way, Most don't know this so I congratulate you. Many get schnoke
Electronics Forum | Thu Jun 08 21:56:41 EDT 2000 | Thomas Ravener
There are many available: Simplimatic Process Control Technology (PCT) JOT PMJ Bosch Dynapace Nutek Applied Conveyor Engineering (ACE) A wholly owned division of Universal Instruments and made for UIC integration of their products. This is just but
Electronics Forum | Mon May 10 09:51:47 EDT 2004 | davef
Yes These instruments are intended for process control. So, it's unrealistic to attempt to correlate readings between machines. Read the EMPF report that Cal recommends here in this thread: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID
Electronics Forum | Fri Nov 20 14:50:13 EST 2009 | davef
One of our instruments has a high impedance front-end. We: * Passed functional test in the environmentally controlled shop. * Failed test, on the same unit, while carrying it to burn-in chambers in an uncontrolled part of the plant. Solder flux resi
Electronics Forum | Fri Aug 27 12:00:54 EDT 2004 | pemnut
Looking in My book, it describes "E" in the last data field as follows. Load error. This function code is not programmed as part of a pattern step. The controller uses the E code as an error marker. While a pattern program is being loaded into memory
Electronics Forum | Wed Feb 15 08:47:09 EST 2006 | pjc
Yes, doing the DoEs on your wave to achieve optimum settings that deliver the best results on your worst board is correct method. If not clear on the process, there are still wave solder process classes out there you can attend or hire in-house. If y
Electronics Forum | Tue May 29 09:36:24 EDT 2007 | davef
oxygen sensor instrumentation Amoung the oxygen monitor suppliers that tailor themselves to reflow machines are: * MapCheck 9000 Process Oxygen Monitor [Topac; 231 CJC Hwy, Suite 103 Cohasset MA 02025; 781-740-8778 F781-740-8779 topac.com sales@topa
Electronics Forum | Thu Jun 29 13:27:20 EDT 2006 | pjc
Verify that the CEMs machines and processes are capable of assembling the technology of your boards- smallest components, largest components, finest pitch, flex circuits, etc� Are their core competences aligned with your requirements- assembly only,
