Electronics Forum | Fri Dec 15 11:06:06 EST 2006 | Gman
Hello All, Is Ionic Cleanliness testing using say an Ionograph on No-clean assemblies a valid test? If not, why? I understand factors like PCB cleanliness but is the 1.56ug/in2 IPC criteria valid for no-clean assemblies and can an Ionograph be used
Electronics Forum | Fri Dec 15 12:37:23 EST 2006 | Gman
Got my answer. Thank you. Several postings on this forum from quite a while back!
Electronics Forum | Thu Feb 12 11:57:59 EST 2009 | jmiller
i have searched the forum for hours. read all the threads that deals with cleanliness and ionic testing. (http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=40295) (http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=22603) (http://www.
Electronics Forum | Wed Sep 02 02:45:01 EDT 2009 | rocko
Hi All, Let me summarize the key facts and findings: 1) This is not a permanent problem. Only one production batch was affected. The cleaning solution was exchanged and now the cleaning process runs normally. 2) Probably the residues are not ion
Electronics Forum | Mon Aug 31 12:37:39 EDT 2009 | rocko
Hi All, As a result of equipment damage I have a problem with a cleanliness of printed circuit assemblies. One whole production batch was polluted by ionic residues because a large amount of hard water had been penetrated in the water-supply system
Electronics Forum | Tue Sep 01 20:46:03 EDT 2009 | davef
No, put a thermocouple on the heater and monitor the temperature during cleaning.
Electronics Forum | Wed Sep 02 21:57:17 EDT 2009 | davef
contacts for cleaning contractors are: * Petroferm Contract Services [www.partscleaned.com] Franklin, Ky * Aqueous Technologies [www.aqueoustech.com] Rancho Cucamonga, CA * FinePoint Precision Cleaning [www.finepointinc.com] Kokomo, IN * Austin A
Electronics Forum | Wed Sep 02 16:41:44 EDT 2009 | pcbcleaning
Advanced Cleaning Solutions is a Johnstown, PA based electronic manufacturing service provider (EMS) with more than 3,500 square feet of ESD safe facilities. Our services include precision PCB cleaning and ionic cleanliness testing/verification usin
Electronics Forum | Thu Aug 17 16:12:48 EDT 2000 | John Maxwell
We are using a water wash paste for our boards which is leaving ionic contamination ( salts). In the presence of low humidity levels this creates the effect of a capacitor. Our product which is test instrumentation does not calibrate. I am lookin
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p