Electronics Forum | Mon Apr 29 09:54:46 EDT 2002 | davef
MadReindeer If this white residue is salt, * Why do you say is the presence of it 'not dangerous it only looking bad'? Don't salts sometimes go into solution with moisture on the board from humidity in the air and form cathodic plating shorts betw
Electronics Forum | Tue Oct 07 14:23:37 EDT 2003 | Adam
The Omegameter (or Ionograph) detect contamination by measuring the conductivity of the solution used to extract the board. This conductivity number reflects the sum of all of the ionics in the extraction solution. Unfortunately, we can't sort out th
Electronics Forum | Thu May 26 19:32:13 EDT 2005 | Mike Konrad
Three popular methods: Resistivity of Solvent Extract (ROSE) Test Method IPC-TM-650 2.3.25: The ROSE test method is used as a process control tool to detect the presence of bulk ionics. The IPC upper limit is set at 10.0 *g/NaCl/in2. This test is p
Electronics Forum | Wed May 22 08:43:40 EDT 2002 | pjc
I have experience cleaning NC for military boards. The reason for cleaning the NC is due to conformal coating requirements. Zestron Vigon A200 and Atron AC 100, as well as Petroferm Hydrex DX have both been effective at cleaning Alpha UP78 NC paste.
Electronics Forum | Wed Feb 02 12:11:31 EST 2000 | Dave F
Casimir: Resistivity of Solvent Extract (ROSE) testers measure ionic contamination by washing boards with a DI water/IPA solution. (No-clean people: Stop and go on to something else.) The testers are process control instruments used to monitor a
Electronics Forum | Mon Mar 01 22:24:53 EST 1999 | Dave F
| It seems to be that we have to much NaCl left on our assambled PCB's. | The flux we use is from cobar. They say it can not be from the flux... So what can be the reason, what kind of problem may occer when there is to much NaCl. | George: When so
Electronics Forum | Wed Oct 18 16:33:26 EDT 2000 | Dave F
Mike: An omega meter has very little to do with ion chromatography. * IPC TM-650, 2.3.25B, Detection and Measurement of Ionizable Surface Contaminants is a process control method that washes boards with an isopropanol / water solution and measures
Electronics Forum | Sun Feb 26 21:48:28 EST 2006 | Mike Konrad
Hi GS, Just a clarification� No-clean does NOT equal no ions. It equals less ions (at best). Automatic R.O.S.E (Resistivity Of Solvent Extract) testers are commonly used to detect ionic contamination from no-clean applications. Your comment rega
Electronics Forum | Thu Oct 17 17:29:46 EDT 2013 | lordofpiggies
Hello. We are building a CCA which has a silicone-based adhesive whose purpose is to bond the bottoms of multiple LED displays to heat sinks. Our customer wants the CCA to be tested for ionic residues per J-STD-001, but we are hesitant to test the
Electronics Forum | Tue Jun 12 18:06:17 EDT 2001 | davef
The criterion you use will depend on the test method you select. For minimum requirements, look at J-STD-001C, Para 8, "Cleanliness Requirements". I figure that you�d measure the residues on a lot of your current product, measure the res on a lot o
1 |