Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Fri Jul 29 18:49:03 EDT 2011 | marcelll
Hi guys, I'm looking for a special calibration program I need to complete a IP3 part camera calibration. This is to use the button jig in the procedure. They name the program IP3_camera_proper in the procedure. Anybody having a copy ?
Electronics Forum | Tue Aug 02 14:31:57 EDT 2011 | smellew
Marcel, have you completed your calibration or do you still reuire some help? llew
Electronics Forum | Wed Aug 03 11:07:29 EDT 2011 | cyber_wolf
IP3 camera calibration requires someone that knows what's going on to do it. Unless you have been trained on this specifically I would recommend that you don't attempt it by yourself. I believe the button jig is used for squaring the camera up. You
Electronics Forum | Fri Nov 13 11:41:37 EST 2009 | gregcr
Hi All, I am implementing a proper feeder maintenance program for my HSP chipshooter feeders. I have the calibration jig. I am developing a procedure with the following general steps: 1. Cleaning 2. Visual Inspection / Repair 3. Calibration / Testi
Electronics Forum | Sun Apr 30 22:29:23 EDT 2000 | Jack
We use Fujicam for FUJI CP643 programming and optimizing in our plant. There are about 800 parts (80% chips and 20% lead components) being placeed by 2 CP643. When using Fujicam automaticly allocate feeders and optimize insert order, I got 29000 cph
Electronics Forum | Wed Jul 10 22:45:06 EDT 2002 | davef
A field meter would be nice. Suppliers are: http://www.sar101.com/cpf/handheld.htm We like: M265, Stat Arc II [Monroe Electronics, 100 Housel Avenue, Lyndonville, NY 14098 800-821-6001]. It would be good to words like 'chopper stabalized' in the d
Electronics Forum | Sat Apr 20 07:44:01 EDT 2002 | Bob
I heard from a second hand source that the heads required calibrating reqularly and to do that they needed to be sent to the manufacturers. I also heard that they were fairly unstable and broke down alot. All these were not from first hand experian
Electronics Forum | Fri Mar 02 13:04:45 EST 2018 | shuchita
We are an ISO certified PCB & PCBA manufacturer located in USA. We are expanding our team at India(ahmedabad) office , 1) We require an SMT programmer that is familiar with SMT pick and place machines like Juki and/or Universal and softwares like
Electronics Forum | Tue Dec 03 14:05:09 EST 2013 | chadsuckow
You can have it either way. In each program you can select to have the side pressure active for the entire program. The factory setting is to have it release immediately after it pushes the pcb against the fixed rail.
.gif)
.png)
