Electronics Forum | Tue Mar 17 11:06:33 EDT 2009 | cyber_wolf
We have never been able to get our IP3 to place BGA's consistently. We installed new bulbs,ran glass plate calibration,played with scan speeds, scan area etc. etc.... I would not recommend this machine for BGA's
Electronics Forum | Thu Jun 23 03:43:45 EDT 2005 | ajaydoshi
Hi Jerry, > > Thanks for the info. Is vision > number required for the IP3? From the manual it > appears not (needed for IP1 & 2), however vision > type is required. > > Thanks, Dave We are using IP3 & placing BGA. BGA part data only for outer
Electronics Forum | Tue Jun 18 00:53:09 EDT 2002 | Gang shen
we are surprised to find that ten BGA chips are excursion one line on the board,together the IP3 placed 600 BGA ,it really confused me.anyone have any suggestion for the reason? the BGA IS 20*20-16*16,pitch is 1.27.
Electronics Forum | Tue Apr 23 19:14:26 EDT 2002 | mantis
What is the error your getting,I have used the ip3 to place Bga'a before and had no difficulty i was also using the MCS30.
Electronics Forum | Mon Apr 22 22:14:54 EDT 2002 | Gang shen
the case is that FUJI IP3 failed to place BGA ,when it is processing the BGA vision ,often occours the alert message. Our oprating system is MCS30,the software version is v1.3. anyone encounter the same problem? it is be appciatiate that feedback any
Electronics Forum | Thu May 18 23:22:44 EDT 2000 | Micah Newcomb
Jerry, Contact FujiAmerica and ask for their newest product Guide. Some differences are..... IP2 - SMD1 vision (back lighting only, coplanarity check optional) IP3 - SMD3 vision (back, front, coplanarity check optional) IP3 - BGA transport, I
Electronics Forum | Wed Feb 24 11:36:06 EST 2010 | kruzon
Is there a simple way to create vision data for bga's. Our machine is a Fuji IP3. I have a bga with balls all over the place. Thanks -
Electronics Forum | Mon Jul 01 21:55:59 EDT 2002 | Gang shen
oh,sorry,my expresion is not clear.the problem is that about one sixties of BGA is deviation from the proper position one line. my place machine is IP3,the part data of the BGA is okay(in my opinion),our "test vehicle" is poor just by human eyes,with
Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912
For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and
Electronics Forum | Tue Mar 17 11:13:26 EDT 2009 | tegel
Hi, Now it was a couple of years since I did this but it's possible. I have been down to 0.5 mm pitch. If you have a vision system with vision type 230 I would suggest that you use that. One other trick is to only specify 50 % of the ball diameter.
.gif)
winsouce.jpg)
