Electronics Forum | Thu Jun 23 21:04:04 EDT 2005 | darby
If you have concluded that it is not a file storage problem you may wish to consider - When setting up a job the camera can move to virtually any position. This does not mean that the actuators on the stencil or board have enough travel to align the
Electronics Forum | Tue Nov 19 12:36:01 EST 2013 | youngbuck
DEK Infinity-Does anyone have any information on why the automatic screen changer would load the same screen in a different position everytime you load and unload? We constantly have to do a search step for the fiducial and most of the time it will e
Electronics Forum | Mon Mar 07 18:23:30 EST 2016 | ttheis
Hi everyone, I'm about 90% to running production on my gsm but I'm not able to get the machine to look at fiducial marks and make corrections to the placement. When I run advanced board configuration and seek to the first fiducial the pec camera tra
Electronics Forum | Thu Dec 16 11:54:45 EST 1999 | Mike Naddra
At reflow an inert atmosphere is used to mitigate the occurance of oxidation, to me the decision weather to move from an inert atmosphere is based on several things ; PCB surface finish - are you using a HASL finish, OSP or another surface finish and
Electronics Forum | Fri Nov 18 12:32:56 EST 2011 | gosswald
I have a Quad 2C I have been in the process of setting up. Currently everything seems to be working on the unit but I am having some vision inspection problems with it. The vision system does comes on line and seems to work correctly. I have one bo
Electronics Forum | Thu Dec 11 00:00:22 EST 2003 | david2002
Does anybody have the measurements for the dimensions of the CyberSentry fiducial calibration board. This is a board used to set the machine up if paramter files are lost. Our board has gone missing and cyber optics has a long lead time. We can easil
Electronics Forum | Mon Nov 21 10:56:32 EST 2011 | gosswald
I have been able to get the machine to run by using the teach feature in Central Controller. The fiducials coordinates are there from Auto Program even though they won’t run. Another problem I have with this is the board fails the visual inspection i
Electronics Forum | Fri May 16 16:32:42 EDT 2008 | jmelson
I have done noting about optimization, except manualy choosing the feeder location of the most common part or two. I do have a program that takes Protel 99SE pick and place files and converts them to the placement file. I haven't done a program for
Electronics Forum | Fri Nov 05 17:17:32 EST 1999 | NickMata
Fred, The system will base itself on the information within the GF file. In the GF file you provide the description as to the physical dimensions, features, tolerances and handling for the part. Once the component has picked up the image, it is "see
Electronics Forum | Wed Aug 22 19:54:54 EDT 2001 | mkallen
Can anyone point me to a relevant IPC spec that specifies an allowable board stretch, measured between metal features on outer layers (e.g., between fiducials and component pads on the topside of a board)? I've got a non-linear stretch problem that'
IPC is the trade association for the printed wiring board and electronics assembly industries.
Training Provider / Events Organizer / Association / Non-Profit
3000 Lakeside Drive, 309 S
Bannockburn, IL USA
Phone: 847-615-7100