Electronics Forum | Thu Feb 26 16:49:57 EST 1998 | specnor tecnic corp
we have some rebuilt wave soldering systems in stock ready to be shipped. epk-ii smt with lambda wave, chip wave ,omega wave. 4 preheaters,jacking stand roll out computer control. machine is in a great shape. another machin upk15f with 6 preheaters
Electronics Forum | Wed Jan 14 06:41:08 EST 2009 | andrzej
I did not tried this before (never hada chance to do it) but I considered such option - maybe try using temporary wavesolder mask on such small components. Run both sides of PCB through SMT oven and then mask 0402 completely and go with wavesoldering
Electronics Forum | Sat May 17 09:42:10 EDT 2008 | realchunks
The Optimizer can be run through your wave like a regular board. It measures temps, times and parallelism of your waves in relationship to your board (pot to conveyor). Run the Optimizer till you get you temps, times and are parallel to your waves.
Electronics Forum | Mon Dec 17 13:58:54 EST 2007 | ck_the_flip
I made my own wave measuring device using KIC2000 system. KIC2000 has automatic wave detection, so now I have a profiler for both reflow ovens and wave solder. The delmat carrier only cost $500. A guy, Samir, from this forum gave me the idea, actu
Electronics Forum | Thu Jun 27 03:03:57 EDT 2019 | SMTA-David
Hi, I have a small assembly line that consists of a Semi-Automatic Stencil machine, a Samsung Pick and Place, a small IR reflow oven and a wave soldering machine. The reflow oven is presenting the biggest bottleneck. The machine is a small IR (T960
Electronics Forum | Tue Sep 18 21:37:06 EDT 2012 | vergara1
Hi Manoel, I want to make sure I understand what you are talking about; reading the reply,along with your replys it almost sounds as if we are not talking about the same thing. In your picture I'm seeing a SMT diode correct? You are talking about th
Electronics Forum | Mon Aug 16 04:55:30 EDT 2004 | roel
Concerning the solder-balls, there are a few causes for this. Try to slow down your solder-speed (P.e 80cm/min). Can you measure temperature after the pre-heat zone? Are there also blow-holes in the joints? Personally I think there is some water in t
Electronics Forum | Fri Dec 16 08:00:26 EST 2005 | jax
What you are most likely dealing with: Insufficient Pure Sn layer ( multiple causes ) Because elevated temperatures accelerate the diffusion process, the thickness of the Pure Sn layer will reduce during every thermal cycle... ( bakeing PCBs, S
Electronics Forum | Tue May 20 15:35:36 EDT 2003 | kictech
How are you attaching your thermocouples? When using HT solder, the solder/TC surface of the joint can be reflective. This condition coupled with the IR can give you false temperature data since some of the heat is reflected away from the TC. Le
Electronics Forum | Fri May 23 16:05:34 EDT 2003 | Kris
Hi, I think using a epoxy glue will be a more approriate process for a IR oven than kapton tapes or high temp solder Comments ?
