Electronics Forum | Mon Sep 25 12:35:49 EDT 2006 | jdumont
1000 Lumen per meter squared minimum per J-Std-001D 4.2.3
Electronics Forum | Wed Jul 11 14:44:21 EDT 2007 | fredericksr
Hi folks! Has anyone ever successfully verified adequate ESD control at
Electronics Forum | Tue Jun 29 14:42:55 EDT 2004 | davef
You're correct, for every dumpster full of paper written about solder, there's a sentance written about fluxes. There's dribs and drabs about fluxes in most of the soldering books [ie, Manko, Klein-Wassink, Judd, Strauss, etc] and most of that is ve
Electronics Forum | Wed Jul 18 10:35:41 EDT 2007 | hussman
This seems like an odd request from an auditor. I can see an auditor requiring proof that you meet the J-Std, but verify? This would require you purposely damage product on a "before and after" scenario. As long as your manufacturing guideline say
Electronics Forum | Wed Jul 18 11:49:59 EDT 2007 | davef
The auditor may be using "verify" in an ESD Program context. See ANSI/ESD S20.20 [1999], 6.1.3, Compliance Verification Plan. It gives one definition of what the auditor may be seeking. For more on verification programs, look here: http://www.protek
Electronics Forum | Wed Jul 24 22:45:54 EDT 2002 | davef
WS609 is a wonderful paste. J-STD-001, 4.2 states words to the effect that for Class 3 products Type H or M fluxes should only be used for tinning operatins. Most water soluable fluxes are either H or M. I believe that you can use Type H or M flux
Electronics Forum | Mon Jul 16 15:44:27 EDT 2007 | davef
J-STD-001 doesn't necessarily require additional controls under conditions of low humidity, only that you verify the effectiveness of what you have in place. ESD S20.20 [1999] only says that relative humidity above 30% is "desirable". ESD S20.20 [200
Electronics Forum | Thu Mar 15 08:16:28 EST 2001 | davef
In a similar conversation ... Alex Krstic, NovAtel Inc. said ... Hello all. We recently received some boards with some of the chip resistors placed with their resistive elements towards the board. J-STD-001B and C view this as violation for both Cl
Electronics Forum | Thu Sep 26 14:43:43 EDT 2002 | Jim M.
unsure of what solder spec. your working to?.IPC/EIA J-STD-001C, Section 9.2.4 clearly states dull, matte, gray or grainy appearing solders are accpetable depending on your process and if the acceptability of the neaxt paragraph is met.IPC 610 and J-
Electronics Forum | Tue Jul 17 21:48:09 EDT 2007 | davef
Per ESD Handbook TR 20.20 paragraph 5.3.15 Humidity "Humidity is beneficial in all ESD Control Program Plans. Contact and separation of dry materials generates greater electrostatic charges than moist materials because moisture provides conductivity
