Electronics Forum | Mon Jan 21 07:01:02 EST 2013 | ericrr
I can not believe this, We get back from Summer holidays turn on the first machine Juki KE750L goes to do a home and before the head moves, Error notice: rear feeder rise error, I go around the back, nothing out of place. but notice the receiver end
Electronics Forum | Tue Oct 20 23:14:01 EDT 2015 | kiwiguy12345
Hi, I have struck a problem with the X axis on my Juki 740. As soon as I "home" the machine the X driver displays the code "961" Does anyone have any ideas as to a solution for this problem? Thanks!
Electronics Forum | Sat Aug 26 21:53:47 EDT 2017 | kieren
Hi Everyone. I am looking for some help with my Juki Ke750. The problem is that after booting up and then starting the home position function I receive an error as stated below Message File Error E0000: KEY=200078 STATUS=2 C:¥X750 ¥GX3ERROR。MSG
Electronics Forum | Tue Jun 18 09:02:02 EDT 2013 | leeg
We are having issues on our 750 machine with the following errors, E240015 and E240021 this can occur on any of the 3 heads therefore surely ruling out Laser issues with 1 particular head?
Electronics Forum | Mon Apr 03 19:52:28 EDT 2023 | tey422
You should take a snapshot of the error message, it should including an error code with it. Then try to search the error code from the help menu, it might give you more detailed info what might be the cause of the problem.
Electronics Forum | Mon Jul 11 21:46:19 EDT 2011 | garym4569
Anyone know how to enable pick tracking for the Juki 730 and 760. Our Juki 750's and 2060 allow me to press the camera button during a production stop to manually check pick position with the camera if the machine stops for no component, laser recon
Electronics Forum | Mon Jul 15 18:25:23 EDT 2024 | tey422
You might have incomplete data that not completely filled. Sometime it doesn't pop out as error message when you exist to save the program. I would double checks the program again, make sure every info is fully done.
Electronics Forum | Wed Jun 21 12:51:58 EDT 2023 | previnmoore
The Juki is showing and error code of 696007 and is also saying to go to the control panel to set date and time which is not letting the machine run.
Electronics Forum | Thu Mar 30 08:04:56 EDT 2023 | hub
Hello, I'm looking for zevatech (juki) 570 owner that could help me to resolve my problem. I had the following error that occure just before (or sometime a few after) homing the machine : "E7018:Driver Error KNOCK position error ". Previsously I had
Electronics Forum | Thu Aug 20 19:30:45 EDT 2020 | aurash
Hi Guys, I 'm having trouble with a JUKI KE2060 - multiple errors on Z, X, Y axis (it seems that the problem moves around) - the error codes are E602137 E603112 any help or an electrical diagram of the machine are highly appreciated A